[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Using batteries in connection with PV panels

Chun Kwong,
 I would recommend using the Type185 (with gassing effects) battery model as opposed to the Type47 battery model. The parameters of the Type185 battery, while a bit difficult to figure out at first, can usually be found from manufacturer's spec sheets online.
Kind regards,
  David


a8304506@graduate.hku.hk wrote: 
Hello, Trnsys users.

I am simulating a system which use PV panels (Type94) to generate electricity to
drive a compressor.  I intend to use batteries (Type47) to store the electric
power from the PV panels when the compressor is switched off.  Can anyone
advise how I can make the connection, as I also want to use the stored energy
in the batteries when the supply from the PV panels is not sufficient.  Thank
you!

Best Regards
LEE, Chun Kwong
Research assistant
Division of Building Science and Technology
City University of Hong Kong




  

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
  

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley@tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************