[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Fwd: Re: temperature with time step < 1hour

To: <trnsys-users@engr.wisc.edu>
Subject: [TRNSYS-users] Fwd: Re: temperature with time step < 1hour
From: "John Macbeth" <John.Macbeth@lews.uhi.ac.uk>
Date: Thu, 27 Nov 2008 16:37:32 +0000
List-archive: <https://www-old.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
References: <000a01c950a2$365cdf70$e3c6c19d@arch002> <492ECD1F.CA0E.001A.0@lews.uhi.ac.uk>

Type 56 has its own time step, set in type 56. 

>>> "Marijke Steeman" <marijke.steeman@ugent.be> 27/11/2008 15:09 >>>
Dear TRNSYS-users, 

If I run a simulation with a zone in which the temperature is free floating, and
I use a timestep < 1hour, the output temperature of that zone is not "smooth", 
it looks as there is not interpolation between steps < 1hour. Does anyone knows 
what can cause this effect? 

Regards,


ir-arch Marijke Steeman

Universiteit Gent
Vakgroep Architectuur en Stedebouw
Onderzoeksgroep Bouwfysica en Installaties
Jozef Plateaustraat 22
B- 9000 Gent
tel 09 264 37 52 / fax 09 264 41 85
marijke.steeman@ugent.be

References:
- [TRNSYS-users] temperature with time step < 1hour
  - From: "Marijke Steeman" <marijke.steeman@ugent.be>

Prev by Date: [TRNSYS-users] temperature with time step < 1hour
Next by Date: [TRNSYS-users] Coloured TRNSYS dcks
Previous by thread: [TRNSYS-users] temperature with time step < 1hour
Next by thread: [TRNSYS-users] Coloured TRNSYS dcks
Index(es):
- Date
- Thread