[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Dum Problems with online plotter
Dear Carlos Flores,
I believe this is actually a bug with the adding an extra online plotter.
I don't exactly know what the root cause of the problem is, but I believe
it has something to do with the *.pti file and TRNEXE. In the mean time
to avoid this bug, please try deleting your project's *.pti file in your
project's directory and then run the simulation.
Best regards,
Matt Duffy
----- Original Message -----
From: karlitro@gmail.com
Sent: Wed, October 15, 2008 16:40
Subject:[TRNSYS-users] Dum Problems with online plotter
Hello all,
I modified a STEC library fortran source code and created a new proforma for
one kind of Solar collectors. After debugginf for a while I was finally
getting good results as the proforma was doing exactly what I wanted.
So what's the problem?
If I use only a printer I get good results, all the variables give results
that would sound quite reasonable and no "NaN" nor "infinite" values are in
the final results. Now --this is the dummy-part-- if I add an online plotter
to the project (in order to see things better) I get this "floating point"
error right at the beggining (at the second time-step... 1hr). It doesn't
matter what do I connect the online plotter with... If I connect it to a
forcing function (for example), which doesn't really interact with my
created Type it does the same thing!!!
I tried debugging my TypeXXX.for, but when I'm on it I get to the TRNSYS.for
file and that's where the problem occurs. This happens almost at the end of
the TRNSYS.for file, when the time-step it's about to conclude (after this
loop, line 959):
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C SEND THE ONLINE PLOTTER PARAMETERS AND OUTPUTS BACK TO THE EXECUTABLE
FOR PLOTTING
DO J=1,5
DO I=1,20
PLOTOUT(I+(20*(J-1)))=PLOUT(I,J)
ENDDO
DO I=6,20
PAROUT(I+(20*(J-1)))=PROUT(I-5,J)
ENDDO
ENDDO
C AT THIS POINT THE SIMULATION IS FINISHED AT THE CURRENT TIMESTEP
RETURN
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
After this (and BEFORE the error) it jumps to the end of the file (where it
says "END"), and then I get the following error in Visual Studio:
"No symbols are loaded for any call stack frame. The source code cannot be
displayed". I click next and I get the error in TRNSYS.
Has anyone had this error before? I'm doing the simulations for my master
tesis and I haven't been able to find out how to fix it.
Thanks to all
Carlos
On Mon, Oct 13, 2008 at 4:11 PM, Carlos Flores <karlitro@gmail.com> wrote:
> Hello Matt or David,
>
> So, I think I'm finally understanding the way you do things with FORTRAN,
> but have a finall question.
>
> I followed all the 8.5 basic steps and now things are way more clear. I'm
> using Intel visual fortran and Microsoft Visual Studio, and did the
> TRNDLL.dll build and rebuild steps (I did them using the Solution in the
> folder %TRNSYS16%/Compilers/\Ivf91-Mvs2005.
>
> Now, the thing is... I added my new type in a project under the same
> "Solution" and it works fine.
>
> Now, this is my issue now:
>
> 1) Are the new TRNDLL.dll and Type999.dll going where they are suppose to
> go? or, Should I take those files and copy them somewhere?
> 2) Lets suppose the dll goes directly where they are suppose to go. Now,
> what should I tell the proforma I created (in TRNSYS) so it knows that it
> has to do what the Type999.dll file says?
>
> I think I'm really close to be able to modify the way I want all the
> stuff... I only need these final indications.
>
> Thanks one more time for the help.
>
> Carlos Flores
> PRIEN
> Universidad de Chile
>
>
>
>
> On Fri, Oct 10, 2008 at 1:08 PM, Matt Duffy <duffy@tess-inc.com> wrote:
>
>> Dear Artemi Spanaki,
>>
>> Perhaps my manual is not the same as yours. I was trying to reference
>> section 8.5 "Instructions to rebuild TRNDLL.dll and other dynamic link
>> libraries". I recommend looking over that section. Please remember that
>> the TRNSYS Simulation Studio is simply a graphical front-end. To rebuild
>> the TRNDLL, if that is indeed what you are trying to accomplish, you have
>> to do that in your Fortran compiler. Again, that section in the manual
>> lays that out clearly.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>>
>>
>>
>> ----- Original Message -----
>> From: spanakiart@hotmail.com
>> Sent: Fri, October 10, 2008 2:05
>> Subject:[TRNSYS-users] Additional question about dll
>>
>>
>> Dear sir and trnsys users
>>
>> Sorry for being so boring with my questions, but I can't even found the
>> way to have
>> access to 'TRNDll files', on simulation studio. The only way to find these
>> files is
>> through the explorer. This is why I can't follow the instructions of ref.
>> 8.4.9.4 in
>> page 8-111.
>>
>> Is there any chance of having that problem because of an error in my
>> installation?
>> I have the 16.00.0038 TRNSYS version.
>> In username I get the message of please enter user id.
>> Thank you very much.
>> Yours sincerely
>>
>> Artemi Spanaki
>>
>> _________________________________________________________________
>> Connect to the next generation of MSN Messenger
>>
>> http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&amp;source=wlmailtagline_______________________________________________
>> TRNSYS-users<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline_______________________________________________TRNSYS-users>mailing
list
>> TRNSYS-users@cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>>
>> ----- End of original message -----
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users@cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>
>
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
----- End of original message -----