|
Hi I have modeled a simple geothermal heat
pump according to the example of Geothermal Application of Tess Library. The
only changes that I have made is that I have a water to water geothermal
heat pump (type 668). The system seems to work correctly. The load loop seam to
augment 4 C and the ground loop reduce 18 C when the system is On in heating
mode. I tried to connect this system to
building56 as a ventilation system so I apply in between a heat exchanger of
any type ( type 91, 5g, 5e, 5a, 5e), so the system gets 75% of fresh air
and 25% of recycled air heated in the water to air heat exchanger and go ventilation
system of building. The results that I get is absolutely wrong. After the
connection of the geothermal heat pump with the building the ground loop of the
G.H.P. reached the 100-300 C. and the air to the building seem to be
cooled. I checked the ghp system alone and seem to
work I checked the heat exchanger alone and seem
to work I checked the building alone and seem to
work But the connection is absolutely wrong Could someone suggest me anything that
might be wrong. ? Thank you |
Attachment:
system with building.jpg
Description: JPEG image
Attachment:
system without building.jpg
Description: JPEG image
