Re: [TRNSYS-users] connection TRNSYS-Fluent

[Diego Alejandro Arias <daarias@uwalumni.com>]

Hi Silvia,

Unfortunately, yes, you need to recompile Type101 with your particular  
script for updating the boundary conditions in Fluent.

The philosophy behind this type was to demonstrate that the connection  
was possible, and to give a basic example of how to do that.

The current implementation has TRNSYS as the main driver: TRNSYS calls  
Fluent, and waits for it to finish the simulation at each time step.   
Perhaps another solution is to have Fluent drive the simulations, and  
let it call TRNSYS at each Fluent-time step.  This implementation  
would require some work on the TRNSYS-developers side, but it can be  
implemented if there are a few users that think that this approach is  
useful.

Please feel free to share with us your suggestions for making this  
coupling more useful.

Best regards,

Diego






Quoting Soutullo Castro Silvia <silvia.soutullo@ciemat.es>:

> Hello Trnsys Users,
>
> I´m trying to connect TRNSYS (version 16) - Fluent but i have some   
> problems with the ScriptFluent.in
> It´s always necessary modify this file in Type 101 or there is   
> another way to do it? There are some instructions to do it?
>
> Could someone help me?
>
> Thanks in advance.
>
>
> Silvia Soutullo Castro
> Eficiencia Energética en Edificación.
> CIEMAT.
> e-mail: silvia.soutullo@ciemat.es
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
> ----------------------------
> Confidencialidad:
> Este mensaje y sus ficheros adjuntos se dirige exclusivamente a su   
> destinatario y puede contener información privilegiada o   
> confidencial. Si no es vd. el destinatario indicado, queda   
> notificado de que la utilización, divulgación y/o copia sin   
> autorización está prohibida en virtud de la legislación vigente. Si   
> ha recibido este mensaje por error, le rogamos que nos lo comunique   
> inmediatamente respondiendo al mensaje y proceda a su destrucción.
>
> Disclaimer:
> This message and its attached files is intended exclusively for its   
> recipients and may contain confidential information. If you received  
>  this e-mail in error you are hereby notified that any  
> dissemination,  copy or disclosure of this communication is strictly  
> prohibited and  may be unlawful. In this case, please notify us by a  
> reply and  delete this email and its contents immediately.
> ----------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users