[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Air cooled evaporator &condenser



Hello Tsaeri,

The standard way of adding conditioning equipment when you are using Type
56 or other building models is to define them as ventilation streams, with
temperature, humidity and air exchange rates from the equipment outputs. I
am not sure what kind of equipment you are trying to model, as I am far
from an HVAC expert, but you can probably model an air conditioner or an
air source heat pump in cooling mode by using Type 20 in the standard
TRNSYS library. If you are looking for a chiller, you have Type 53. Of
course, if you have the TESS HVAC library, you will have many more
components to choose from. In most cases you will also need performance
data from a real model to put in an external file which is read by the
component. You can for example visit www.carrier.com to search for such
data.

Hope this was helpful in some way.

Kind regards
Knut Erik



                                                                           
             trnsys-users-requ                                             
             est@engr.wisc.edu                                             
                                                                        To 
             06/21/2008 07:02          trnsys-users@engr.wisc.edu          
             PM                                                         cc 
                                                                           
                                                                   Subject 
             Please respond to         TRNSYS-users Digest, Vol 42, Issue  
             trnsys-users@engr         23                                  
                 .wisc.edu                                                 
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           





----- Message from Tsaeri Nimeewat Bikulu <leyabuekum2008@yahoo.com> on
Sat, 21 Jun 2008 01:23:34 -0700 (PDT) -----
                                                                           
        To: trnsys-users@engr.wisc.edu                                     
                                                                           
   Subject: [TRNSYS-users] Air cooled evaporator &condenser                
                                                                           

Hello every body
I am trying to simulate a cold store and I modeled all the necessary
components which are used in the cold store now I left two components which
are air cooled evaporator and condenser. How can I add these components?
Please tell me the way how to add these components.

Best regard




 _______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users







----------------------------------------------------------------------------------------------------------------------
NIVAs hovedkontor har flyttet til nye lokaler i CIENS - Forskningssenter
for miljø og samfunn; Gaustadalléen 21, 0349 Oslo. Meld deg på vårt
nyhetsbrev på www.niva.no