[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Geometry Issues

To: "TRNSYS Forum" <trnsys-users@engr.wisc.edu>
Subject: [TRNSYS-users] Geometry Issues
From: "Jeff Rayl" <jer5056@psu.edu>
Date: Fri, 20 Jun 2008 09:53:31 -0400
List-archive: <https://www.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@engr.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.engr.wisc.edu>
List-post: <mailto:trnsys-users@engr.wisc.edu>
List-subscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=unsubscribe>
Sender: jrayl10@gmail.com

I'm trying to model a PV system that is really two separate arrays intertwined. I need one array to face East, with an individual panel angle of 15 degrees and the entire array slope of 10 degrees. The second array needs to face West with the same angles. This is supposed to be somewhat like tracking on a North South axis, only with two fixed panels, one in each direction.

I've been attempting to do this by using Type 30a. Also, when inporting the weather data the azimuth and slope of the surfaces can be set. Does this interfere with setting the slope and azimuth set in type 30a?

Thank you,

--
Jeff Rayl
Solar Decathlon 2009 Electrical & PV PM
Engineers for A Sustainable World President
Electrical Engineering

Follow-Ups:
- Re: [TRNSYS-users] Geometry Issues
  - From: David Bradley <bradley@tess-inc.com>

Prev by Date: Re: [TRNSYS-users] how not to get output list file(*.lst)
Next by Date: Re: [TRNSYS-users] Geometry Issues
Previous by thread: [TRNSYS-users] how not to get output list file(*.lst)
Next by thread: Re: [TRNSYS-users] Geometry Issues
Index(es):
- Date
- Thread