[TRNSYS-users] Problem simulating evaporative cooling

["Ricardo Gallegos" <ricardogallegoso@gmail.com>]

Dear all,
I am simulating a simple system consisting of an evaporative cooler connected to a house, but the humidity ratio of the outlet air from the cooler is the same than that inside the house. This does not make much sense to me for as I see the situation  the air from the cooler mixes with the air inside the house ( at a differnet humidity ratio) and as a result the humidity ratio should be different. Temperatures of the air from the cooler and inside the house are, as expected, different. Is this a problem in how the Type 65a models the exchange of air, or there is something I am not considering?
 Regards and thanks for any advice on this.
I attach my studio file as well as my Building and weather files.
Ricardo Gallegos
Universidad Autonoma de Baja California.
Mexicali, Mexico

Attachment: MX_MexicaliSMN.tm2
Description: Binary data

Attachment: Singlehouseeavportivecooling.TPF
Description: Binary data

Attachment: Valle del Pedregal1.bui
Description: Binary data