|
Thanks I will try Laurent Michaël Kummert a écrit : Laurent, I have been using that update (6.6C3) for a while and I haven't found any problem. There were indeed some problems with the first iterations of update C (6.6C1 and 6.6C2) but they were fixed in 6.6C3, and to my knowledge the "6.6C3" update is the only one that is still available. Regards, Michaël Kummert ESRU - University of Strathclyde ________________________________ From: Serres Laurent [mailto:laurent.serres@univ-rennes1.fr] Sent: 19 February 2008 17:13 To: Michaël Kummert Cc: trnsys-users@engr.wisc.edu Subject: Re: [TRNSYS-users] linking problems solved Michaël Kummert a écrit : Adriana, I've just solved the problems I was speaking about in my previous e-mail. By upgrading from CVF 6.6.0 to 6.6.B the rebuilding of the dll seems to work succesfully, I wonder why. Because TRNSYS uses some features that were implemented (or fixed) in that update, such as the DLL export instructions, etc. This is why we insist so much on the need for the 6.6B update. It seems that "so much" is not enough yet so this is a good opportunity to remind all users that they will save time and frustration if they use Compaq Visual Fortran 6.6B and not any of the other versions (there is a 6.6C update but it is not required by TRNSYS and introduces some problems so we do not recommend that you install it --- OK, more clearly: Use 6.6B and nothing else!). Kind regards, Michaël Kummert Dear Michaël, today it's difficult to find CVF6.6B to upgrade 6.6.0 version Are the problems solved with 6.6C3 that can be found on HP website? Thank you. -- Laurent SERRES IUT Génie Civil 3, Rue du Clos Courtel BP 90422 35704 RENNES CEDEX 7 FRANCE Tel: (33) 2 23 23 42 02 Fax: (33) 2 23 23 40 51 mèl: laurent.serres@univ-rennes1.fr web: http://perso.univ-rennes1.fr/laurent.serres --
|