Re: [TRNSYS-users] Wrong read data using Type9a

["YU Fu Wing" <befwyu@polyu.edu.hk>]

Dear Chun Kwong

I also identified the feature of performing interpolation between successive 
data rows with the data readers (Types 9a to 9d). You may try using Type 9 
with appropriate parameter settings and create the input file using 
TRNSHELL.

Regards
F.W. Yu
Research Fellow
Department of Building Services Engineering
The Hong Kong Polytechnic University
Hong Kong


----- Original Message ----- 
From: <h8304506@hkusua.hku.hk>
To: "group, Trnsys discussion" <trnsys-users@engr.wisc.edu>
Sent: Tuesday, February 05, 2008 9:56 AM
Subject: [TRNSYS-users] Wrong read data using Type9a


> Dear Trnsys users.
>
> I try to use Type9a to read weather data from a file.  However, I find
> that the read data are average between present and previous time steps
> (although I have selected instantaneous value in the proforma).  Can
> anyone advise what's going wrong?  What will be the difference if I
> choose 0 as the starting simulation time?  Your reply will be highly
> appreciated.  Thank you!
>
> Best Regards
> LEE, Chun Kwong
> PhD student
> Department of Mechanical Engineering
> University of Hong Kong


--------------------------------------------------------------------------------


> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users