Re: [TRNSYS-users] Formatted output to file

[Leen Peeters <Leen.Peeters@mech.kuleuven.be>]

In Studio (the visual interface) pick a printer under the subset
"output", for example one with no units, in the parameter screen of that
printer you find "delimiters" Chose 0 for tabs, 1 for spaces and 2 for
comma`s...the last tab-screen of the printer allows you to select a
place and name for the results file. If you just select a name, it will
be placed in the folder of the file you are simulating...

Then to see the results after the simulation...go to excell and do an
"import external data" which will probably be under the topic "data" in
the menu . There you select the appropriate delimitter


Quoting h8304506@hkusua.hku.hk:

> Yes.  I want to output data to file.
> 
> Best Regards
> LEE, Chun Kwong
> PhD student
> Department of Mechanical Engineering
> University of Hong Kong
> 
> 
> ----- Message from Leen.Peeters@mech.kuleuven.be ---------
>      Date: Mon, 28 Jan 2008 14:21:38 +0100
>      From: Leen Peeters <Leen.Peeters@mech.kuleuven.be>
> Reply-To: Leen Peeters <Leen.Peeters@mech.kuleuven.be>
>   Subject: Re: [TRNSYS-users] Formatted output to file
>        To: h8304506@hkusua.hku.hk
> 
> 
> > can you be a bit more specific. Do you mean output data?
> >
> > Quoting h8304506@hkusua.hku.hk:
> >
> >> Hello, Trnsys users.
> >>
> >> Please advise how I can write formatted data to file.  Thank you!
> >>
> >> Best Regards
> >> LEE, Chun Kwong
> >> PhD student
> >> Department of Mechanical Engineering
> >> University of Hong Kong
> >>
> >>
> >>
> >
> >
> >
> >
> > Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
> >
> 
> 
> ----- End message from Leen.Peeters@mech.kuleuven.be -----
> 
> 
> 
> 




Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm