[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TRNSYS-users] type56 Bugs?
When the temperature
remains at 26 °C it is because you the set temperature is this value. Maybe it
is too trivial but try a much lower maximum power (as input) and see
if the temperature changes.
Timo
BLS Energieplan
GmbH
i. A. Timo Sengewald
Elsenstraße 106
D-12435 Berlin
Tel.: +49 30 53 32 81-0
Fax:
+49 30 53 32
81-40
____________________________________________________
BLS Energieplan
GmbH
Sitz der Gesellschaft: Berlin
Geschäftsführer: Christoph Lange,
Wolfgang Sturm
Registergericht: Amtsgericht Berlin-Charlottenburg, HRB-Nr.
32021
hi, Timo
the room temperature does not change when you are using
this type as shown.
thank you for your quick response.
Regards
Fuqiao
Wang
Sustainable Consulting Engineer
FULCRUM CONSULTING
London: Tel: +44 (0)20 7520
1300/1305
Edinburgh: Tel: +44
(0)131 226 0220
Spain:
Tel: +34 98 5195989
mailto:Fuqiao.Wang@fulcrumfirst.com
www.fulcrumfirst.com
Fuqiao,
what in detail is the problem? All seems fine in the
screen shot. What happens when you run the simulation?
Timo
BLS Energieplan GmbH
i. A. Timo Sengewald
Elsenstraße 106
D-12435 Berlin
Tel.:
+49 30 53 32 81-0
Fax: +49 30 53 32
81-40
____________________________________________________
BLS Energieplan
GmbH
Sitz der Gesellschaft: Berlin
Geschäftsführer: Christoph Lange,
Wolfgang Sturm
Registergericht: Amtsgericht Berlin-Charlottenburg, HRB-Nr.
32021
Dear All
Happy new Year!
please help me with my
problem as attached. in Type 56, when a cooling type being set as an input
limited power, it does not work. I 've tried this power by using a constant, or
unlimited power, both work fine.
what's wrong with it?
Thank you
in advance.
Best wishes
Fuqiao Wang
Sustainable Consulting
Engineer
FULCRUM CONSULTING
London: Tel: +44 (0)20 7520 1300/1305
Edinburgh: Tel: +44 (0)131 226 0220
Spain: Tel: +34 98
5195989
mailto:Fuqiao.Wang@fulcrumfirst.com
www.fulcrumfirst.com
-----Original Message-----
From: trnsys-users-request@engr.wisc.edu
[mailto:trnsys-users-request@engr.wisc.edu]
Sent: 2008年1月2日 18:03
To: trnsys-users@engr.wisc.edu
Subject: TRNSYS-users Digest, Vol 37, Issue 1
Send TRNSYS-users
mailing list submissions to
trnsys-users@engr.wisc.edu
To subscribe or unsubscribe via the World Wide Web, visit
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
or,
via email, send a message with subject or body 'help' to
trnsys-users-request@engr.wisc.edu
You can reach the person managing the list at
trnsys-users-owner@engr.wisc.edu
When replying, please edit your Subject line so it is more specific than
"Re: Contents of TRNSYS-users digest..."
Fulcrum Consulting is proud to be a Founding Member of the
UK Green Building Council. To find out more visit
http://www.ukgbc.org
******************* email confidentiality notice
*************************
This message is intended for the addressee recipient only. It is private and
confidential. If you have received this message in error, please notify the
sender immediately and remove it from your system. If you are not the intended
recipient you must not use, disclose, distribute, copy, print or rely on this
email. Fulcrum First Ltd Incorporated in England and Wales with Registered
Number: 03401753. Registered Office: 62-68 Rosebery Avenue, London EC1R
4RR
************* Fulcrum First Ltd trading as Fulcrum Consulting *************