[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Type 680 - Absorption Chiller

To: "Felipe Magazoni" <felipe_magazoni@yahoo.com.br>, trnsys-users@engr.wisc.edu
Subject: Re: [TRNSYS-users] Type 680 - Absorption Chiller
From: "Jeff Thornton" <thornton@tess-inc.com>
Date: Thu, 22 Nov 2007 09:49:41 -0600 (CST)
Importance: Normal
List-archive: <https://www.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@engr.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.engr.wisc.edu>
List-post: <mailto:trnsys-users@engr.wisc.edu>
List-subscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=unsubscribe>
Reply-to: thornton@tess-inc.com
User-agent: FuseMail W

> I'm using the Type 680 to simulate an absorption chiller with 20 tons.
> But the inlet hot water temperature of the machine is 80C. The external
> data file cannot be used, because of the low inlet hot water
temperature. How can
> I solve this problem?

Modify the external data files to represent the performance of the machine
that you are using.  The external files are not meant to represent all
machines and are just provided as a "getting started" reference.  The
model is flexible enough to accept different number of inlet temperatures,
setpoints etc.

Jeff

Jeff Thornton
President - TESS, LLC

2916 Marketplace Drive - Suite 104
Madison WI 53719 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton@tess-inc.com
Web: www.tess-inc.com

Prev by Date: [TRNSYS-users] Additionnal Shading Modeling
Next by Date: [TRNSYS-users] TRNSYS 16 under WinXP64 and linux (WINE)
Previous by thread: [TRNSYS-users] Type 680 - Absorption Chiller
Next by thread: [TRNSYS-users] Additionnal Shading Modeling
Index(es):
- Date
- Thread