Hi,
I'm trying to modelling an air ventilation system with electric chillers.
I'm trying to use the "parallel chillers" (type53) and an "heat exchanger" (TYPE5b) water-air, I think i should connect the inlet water temperature of the evaporator as input for the cold side of the heat exchanger (the hot side is the outdoor air, then after having been cooled down goes to the fans of ventilation system).
My problem is that the INLET water temp of the evaporator is an input NOT an output for the "parallel chillers"! (the output is the OUTLET water temp of the evaporator)
So i dont know how to do it...
there is a better way to do it? maybe with other components?
thanks,
Filippo