[TRNSYS-users] Iwent your help

I went to add a new component and b/s of your help I make it perfectly and now I will need another help that is I wrote the equation of the new component and I went to calculate the output with initially assumed value in other word I went to use the output of the firest will be the input of the second iteration so any one besides you having a knowdlege of fortrun pleese help me .

the equation will be as followes

by using this equation you can calculate the initial value of

p1,Tg11,Tg21,Tf11 and Tf21 so I went to use this valu as input How can I use it

Yahoo! Autos new Car Finder tool.

SUBROUTINE TYPE236 (TIME,XIN,OUT,T,DTDT,PAR,INFO,ICNTRL,*) C************************************************************************ C Object: habtish collector C Simulation Studio Model: Type236 C C Author: C Editor: C Date: July 20, 2007 last modified: July 20, 2007 C C C *** C *** Model Parameters C *** C *** C *** Model Inputs C *** C Ac m^2 [-Inf;+Inf] C Lc m [-Inf;+Inf] C p1 m [-Inf;+Inf] C beta degrees [-Inf;+Inf] C tbe m [-Inf;+Inf] C te m [-Inf;+Inf] C de m [-Inf;+Inf] C Ep - [-Inf;+Inf] C Eg - [-Inf;+Inf] C Ki W/m.K [-Inf;+Inf] C Pabso - [-Inf;+Inf] C Gtrans - [-Inf;+Inf] C S12 m [-Inf;+Inf] C Vw m/s [-Inf;+Inf] C rho - [1;1] C sigma - [1;1] C Cpa J/kg.K [1;1] C Ka W/m.K [1;1] C mue N.s/m^2 [1;1] C Adens kg/m^3 [1;1] C pr - [1;1] C Ta C [-Inf;+Inf] C tetai degrees [-Inf;+Inf] C tetaz degrees [-Inf;+Inf] C Gr - [-Inf;+Inf] C Dr kJ/hr.m^2 [-inf;+inf] C a J/K [1;1] C g J/K [1;1] C p J/K [1;1] C Deltt s [-Inf;+Inf] C n - [1;365] C *** C *** Model Outputs C *** C S22 m [-Inf;+Inf] C Nue m^2/s [-Inf;+Inf] C A2 m^2 [-Inf;+Inf] C A1 m^2 [-Inf;+Inf] C Epg - [-Inf;+Inf] C Egg - [-Inf;+Inf] C Upab W/m^2.K [-Inf;+Inf] C Upae W/m^2.K [-Inf;+Inf] C Tao K [-Inf;+Inf] C Taio K [-Inf;+Inf] C Taoo K [-Inf;+Inf] C Tsky K [-Inf;+Inf] C Tg1o K [-Inf;+Inf] C Tg2o K [-Inf;+Inf] C Tpo K [-Inf;+Inf] C Tf1o K [-Inf;+Inf] C Tf2o K [-Inf;+Inf] C Vbeta1 1/K [-Inf;+Inf] C Vbeta2 1/K [-Inf;+Inf] C Grl1 - [-Inf;+Inf] C ma kg/s [-Inf;+Inf] C Ua W/m^2.K [-Inf;+Inf] C Ug1g2 W/m^2.K [-Inf;+Inf] C Ug2p W/m^2.K [-Inf;+Inf] C hr W/m^2.K [-Inf;+Inf] C hc W/m^2.K [-Inf;+Inf] C Uga W/m^2.K [-Inf;+Inf] C Rb - [-Inf;+Inf] C I kJ/hr.m^2 [-Inf;+Inf] C Tp K [-Inf;+Inf] C Tf11 K [-Inf;+Inf] C Tf21 K [-Inf;+Inf] C Tg11 K [-Inf;+Inf] C Tg21 K [-Inf;+Inf] C Efficiency % (base 1) [-Inf;+Inf] C Tp10 K [-Inf;+Inf] C Tg220 K [-Inf;+Inf] C Tg110 K [-Inf;+Inf] C Tao00 K [-Inf;+Inf] C Tf110 K [-Inf;+Inf] C Tf220 K [-Inf;+Inf] C Vbeta11 1/K [-Inf;+Inf] C Vbeta22 1/K [-Inf;+Inf] C Grl11 - [-Inf;+Inf] C Ua1 W/m^2.K [-Inf;+Inf] C Ug1g22 W/m^2.K [-Inf;+Inf] C Ug2p2 W/m^2.K [-Inf;+Inf] C hr1 W/m^2.K [-Inf;+Inf] C hc1 W/m^2.K [-Inf;+Inf] C Uga1 W/m^2.K [-Inf;+Inf] C Rb1 - [-Inf;+Inf] C I1 W/m^2 [-Inf;+Inf] C ma kg/s [-Inf;+Inf] C Tp1 K [-Inf;+Inf] C Tf211 K [-Inf;+Inf] C Tf111 K [-Inf;+Inf] C Tg111 K [-Inf;+Inf] C Tg222 K [-Inf;+Inf] C *** C *** Model Derivatives C *** C (Comments and routine interface generated by TRNSYS Studio) C************************************************************************ C TRNSYS acess functions (allow to acess TIME etc.) USE TrnsysConstants USE TrnsysFunctions C----------------------------------------------------------------------------------------------------------------------- C REQUIRED BY THE MULTI-DLL VERSION OF TRNSYS !DEC$ATTRIBUTES DLLEXPORT :: TYPE236 !SET THE CORRECT TYPE NUMBER HERE C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C TRNSYS DECLARATIONS IMPLICIT NONE !REQUIRES THE USER TO DEFINE ALL VARIABLES BEFORE USING THEM DOUBLE PRECISION XIN !THE ARRAY FROM WHICH THE INPUTS TO THIS TYPE WILL BE RETRIEVED DOUBLE PRECISION OUT !THE ARRAY WHICH WILL BE USED TO STORE THE OUTPUTS FROM THIS TYPE DOUBLE PRECISION TIME !THE CURRENT SIMULATION TIME - YOU MAY USE THIS VARIABLE BUT DO NOT SET IT! DOUBLE PRECISION PAR !THE ARRAY FROM WHICH THE PARAMETERS FOR THIS TYPE WILL BE RETRIEVED DOUBLE PRECISION STORED !THE STORAGE ARRAY FOR HOLDING VARIABLES FROM TIMESTEP TO TIMESTEP DOUBLE PRECISION T !AN ARRAY CONTAINING THE RESULTS FROM THE DIFFERENTIAL EQUATION SOLVER DOUBLE PRECISION DTDT !AN ARRAY CONTAINING THE DERIVATIVES TO BE PASSED TO THE DIFF.EQ. SOLVER INTEGER*4 INFO(15) !THE INFO ARRAY STORES AND PASSES VALUABLE INFORMATION TO AND FROM THIS TYPE INTEGER*4 NP,NI,NOUT,ND !VARIABLES FOR THE MAXIMUM NUMBER OF PARAMETERS,INPUTS,OUTPUTS AND DERIVATIVES INTEGER*4 NPAR,NIN,NDER !VARIABLES FOR THE CORRECT NUMBER OF PARAMETERS,INPUTS,OUTPUTS AND DERIVATIVES INTEGER*4 IUNIT,ITYPE !THE UNIT NUMBER AND TYPE NUMBER FOR THIS COMPONENT INTEGER*4 ICNTRL !AN ARRAY FOR HOLDING VALUES OF CONTROL FUNCTIONS WITH THE NEW SOLVER INTEGER*4 NSTORED !THE NUMBER OF VARIABLES THAT WILL BE PASSED INTO AND OUT OF STORAGE CHARACTER*3 OCHECK !AN ARRAY TO BE FILLED WITH THE CORRECT VARIABLE TYPES FOR THE OUTPUTS CHARACTER*3 YCHECK !AN ARRAY TO BE FILLED WITH THE CORRECT VARIABLE TYPES FOR THE INPUTS C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C USER DECLARATIONS - SET THE MAXIMUM NUMBER OF PARAMETERS (NP), INPUTS (NI), C OUTPUTS (NOUT), AND DERIVATIVES (ND) THAT MAY BE SUPPLIED FOR THIS TYPE PARAMETER (NP=0,NI=31,NOUT=58,ND=0,NSTORED=0) C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C REQUIRED TRNSYS DIMENSIONS DIMENSION XIN(NI),OUT(NOUT),PAR(NP),YCHECK(NI),OCHECK(NOUT), 1 STORED(NSTORED),T(ND),DTDT(ND) INTEGER NITEMS C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C ADD DECLARATIONS AND DEFINITIONS FOR THE USER-VARIABLES HERE C PARAMETERS C INPUTS DOUBLE PRECISION Ac DOUBLE PRECISION Lc DOUBLE PRECISION p1 DOUBLE PRECISION beta DOUBLE PRECISION tbe DOUBLE PRECISION te DOUBLE PRECISION de DOUBLE PRECISION Ep DOUBLE PRECISION Eg DOUBLE PRECISION Ki DOUBLE PRECISION Pabso DOUBLE PRECISION Gtrans DOUBLE PRECISION S12 DOUBLE PRECISION Vw DOUBLE PRECISION rho DOUBLE PRECISION sigma DOUBLE PRECISION Cpa DOUBLE PRECISION Ka DOUBLE PRECISION mue DOUBLE PRECISION Adens DOUBLE PRECISION pr DOUBLE PRECISION Ta DOUBLE PRECISION tetai DOUBLE PRECISION tetaz DOUBLE PRECISION Gr DOUBLE PRECISION Dr DOUBLE PRECISION a DOUBLE PRECISION g DOUBLE PRECISION p DOUBLE PRECISION Deltt DOUBLE PRECISION n C----------------------------------------------------------------------------------------------------------------------- C READ IN THE VALUES OF THE PARAMETERS IN SEQUENTIAL ORDER C----------------------------------------------------------------------------------------------------------------------- C RETRIEVE THE CURRENT VALUES OF THE INPUTS TO THIS MODEL FROM THE XIN ARRAY IN SEQUENTIAL ORDER Ac=XIN(1) Lc=XIN(2) p1=XIN(3) beta=XIN(4) tbe=XIN(5) te=XIN(6) de=XIN(7) Ep=XIN(8) Eg=XIN(9) Ki=XIN(10) Pabso=XIN(11) Gtrans=XIN(12) S12=XIN(13) Vw=XIN(14) rho=XIN(15) sigma=XIN(16) Cpa=XIN(17) Ka=XIN(18) mue=XIN(19) Adens=XIN(20) pr=XIN(21) Ta=XIN(22) tetai=XIN(23) tetaz=XIN(24) Gr=XIN(25) Dr=XIN(26) a=XIN(27) g=XIN(28) p=XIN(29) Deltt=XIN(30) n=XIN(31) IUNIT=INFO(1) ITYPE=INFO(2) C----------------------------------------------------------------------------------------------------------------------- C SET THE VERSION INFORMATION FOR TRNSYS IF(INFO(7).EQ.-2) THEN INFO(12)=16 RETURN 1 ENDIF C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C DO ALL THE VERY LAST CALL OF THE SIMULATION MANIPULATIONS HERE IF (INFO(8).EQ.-1) THEN RETURN 1 ENDIF C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C PERFORM ANY 'AFTER-ITERATION' MANIPULATIONS THAT ARE REQUIRED HERE C e.g. save variables to storage array for the next timestep IF (INFO(13).GT.0) THEN NITEMS=0 C STORED(1)=... (if NITEMS > 0) C CALL setStorageVars(STORED,NITEMS,INFO) RETURN 1 ENDIF C C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C DO ALL THE VERY FIRST CALL OF THE SIMULATION MANIPULATIONS HERE IF (INFO(7).EQ.-1) THEN C SET SOME INFO ARRAY VARIABLES TO TELL THE TRNSYS ENGINE HOW THIS TYPE IS TO WORK INFO(6)=NOUT INFO(9)=1 INFO(10)=0 !STORAGE FOR VERSION 16 HAS BEEN CHANGED C SET THE REQUIRED NUMBER OF INPUTS, PARAMETERS AND DERIVATIVES THAT THE USER SHOULD SUPPLY IN THE INPUT FILE C IN SOME CASES, THE NUMBER OF VARIABLES MAY DEPEND ON THE VALUE OF PARAMETERS TO THIS MODEL.... NIN=NI NPAR=NP NDER=ND C CALL THE TYPE CHECK SUBROUTINE TO COMPARE WHAT THIS COMPONENT REQUIRES TO WHAT IS SUPPLIED IN C THE TRNSYS INPUT FILE CALL TYPECK(1,INFO,NIN,NPAR,NDER) C SET THE NUMBER OF STORAGE SPOTS NEEDED FOR THIS COMPONENT NITEMS=0 C CALL setStorageSize(NITEMS,INFO) C RETURN TO THE CALLING PROGRAM RETURN 1 ENDIF C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C DO ALL OF THE INITIAL TIMESTEP MANIPULATIONS HERE - THERE ARE NO ITERATIONS AT THE INTIAL TIME IF (TIME .LT. (getSimulationStartTime() + . getSimulationTimeStep()/2.D0)) THEN C SET THE UNIT NUMBER FOR FUTURE CALLS IUNIT=INFO(1) ITYPE=INFO(2) C CHECK THE PARAMETERS FOR PROBLEMS AND RETURN FROM THE SUBROUTINE IF AN ERROR IS FOUND C IF(...) CALL TYPECK(-4,INFO,0,"BAD PARAMETER #",0) C PERFORM ANY REQUIRED CALCULATIONS TO SET THE INITIAL VALUES OF THE OUTPUTS HERE C S22 OUT(1)=0 C Nue OUT(2)=0 C A2 OUT(3)=0 C A1 OUT(4)=0 C Epg OUT(5)=0 C Egg OUT(6)=0 C Upab OUT(7)=0 C Upae OUT(8)=0 C Tao OUT(9)=0 C Taio OUT(10)=0 C Taoo OUT(11)=0 C Tsky OUT(12)=0 C Tg1o OUT(13)=0 C Tg2o OUT(14)=0 C Tpo OUT(15)=0 C Tf1o OUT(16)=0 C Tf2o OUT(17)=0 C Vbeta1 OUT(18)=0 C Vbeta2 OUT(19)=0 C Grl1 OUT(20)=0 C ma OUT(21)=0 C Ua OUT(22)=0 C Ug1g2 OUT(23)=0 C Ug2p OUT(24)=0 C hr OUT(25)=0 C hc OUT(26)=0 C Uga OUT(27)=0 C Rb OUT(28)=0 C I OUT(29)=0 C Tp OUT(30)=0 C Tf11 OUT(31)=0 C Tf21 OUT(32)=0 C Tg11 OUT(33)=0 C Tg21 OUT(34)=0 C Efficiency OUT(35)=0 C Tp10 OUT(36)=0 C Tg220 OUT(37)=0 C Tg110 OUT(38)=0 C Tao00 OUT(39)=0 C Tf110 OUT(40)=0 C Tf220 OUT(41)=0 C Vbeta11 OUT(42)=0 C Vbeta22 OUT(43)=0 C Grl11 OUT(44)=0 C Ua1 OUT(45)=0 C Ug1g22 OUT(46)=0 C Ug2p2 OUT(47)=0 C hr1 OUT(48)=0 C hc1 OUT(49)=0 C Uga1 OUT(50)=0 C Rb1 OUT(51)=0 C I1 OUT(52)=0 C ma OUT(53)=0 C Tp1 OUT(54)=0 C Tf211 OUT(55)=0 C Tf111 OUT(56)=0 C Tg111 OUT(57)=0 C Tg222 OUT(58)=0 C PERFORM ANY REQUIRED CALCULATIONS TO SET THE INITIAL STORAGE VARIABLES HERE NITEMS=0 C STORED(1)=... C PUT THE STORED ARRAY IN THE GLOBAL STORED ARRAY C CALL setStorageVars(STORED,NITEMS,INFO) C RETURN TO THE CALLING PROGRAM RETURN 1 ENDIF C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C *** ITS AN ITERATIVE CALL TO THIS COMPONENT *** C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C RETRIEVE THE VALUES IN THE STORAGE ARRAY FOR THIS ITERATION C NITEMS= C CALL getStorageVars(STORED,NITEMS,INFO) C STORED(1)= C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C CHECK THE INPUTS FOR PROBLEMS C IF(...) CALL TYPECK(-3,INFO,'BAD INPUT #',0,0) C IF(IERROR.GT.0) RETURN 1 C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C *** PERFORM ALL THE CALCULATION HERE FOR THIS MODEL. *** C----------------------------------------------------------------------------------------------------------------------- C ADD YOUR COMPONENT EQUATIONS HERE; BASICALLY THE EQUATIONS THAT WILL C CALCULATE THE OUTPUTS BASED ON THE PARAMETERS AND THE INPUTS. REFER TO C CHAPTER 3 OF THE TRNSYS VOLUME 1 MANUAL FOR DETAILED INFORMATION ON C WRITING TRNSYS COMPONENTS. C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C SET THE STORAGE ARRAY AT THE END OF THIS ITERATION IF NECESSARY C NITEMS= C STORED(1)= C CALL setStorageVars(STORED,NITEMS,INFO) C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C REPORT ANY PROBLEMS THAT HAVE BEEN FOUND USING CALLS LIKE THIS: C CALL MESSAGES(-1,'put your message here','MESSAGE',IUNIT,ITYPE) C CALL MESSAGES(-1,'put your message here','WARNING',IUNIT,ITYPE) C CALL MESSAGES(-1,'put your message here','SEVERE',IUNIT,ITYPE) C CALL MESSAGES(-1,'put your message here','FATAL',IUNIT,ITYPE) C----------------------------------------------------------------------------------------------------------------------- C----------------------------------------------------------------------------------------------------------------------- C SET THE OUTPUTS FROM THIS MODEL IN SEQUENTIAL ORDER AND GET OUT C S22 OUT(1)=de-S12 C Nue OUT(2)=mue/Adens C A2 OUT(3)=P1*(de-S12) C A1 OUT(4)=P1*S12 C Epg OUT(5)=1/((1/Ep)+(1/Eg)-1) C Egg OUT(6)=1/((1/Eg)+(1/Eg)-1) C Upab OUT(7)=(ki/tbe) C Upae OUT(8)=OUT(7) C Tao OUT(9)=Ta+273 C Taio OUT(10)=OUT(9) C Taoo OUT(11)=OUT(9) C Tsky OUT(12)=OUT(9)-6 C Tg1o OUT(13)=OUT(9)-0.5 C Tg2o OUT(14)=OUT(9)-0.5 C Tpo OUT(15)=OUT(9)+0.5 C Tf10 OUT(16)=(OUT(13)+OUT(14))/2 C Tf20 OUT(17)=(OUT(10)+OUT(9))/2 C Vbeta1 OUT(18)=1/OUT(16) C Vbeta2 OUT(19)=1/OUT(17) C GrL1 OUT(20)=(9.81*OUT(19)*(OUT(15)-OUT(14))*(S12**3)) & /(OUT(2)**2) C mass flow rate of air OUT(21)=1.7*(mue)*Lc*(OUT(20)/(Pr**2+ & (Pr+0.9524)))**0.25 C Ua OUT(22)=0.664*(Ka/Lc)*((Pr*OUT(20)*COS(beta/57.3))/(Pr+0.9524)) & **0.25 C Ug1g2 OUT(23)=((0.06-(0.017*beta/90))*(Ka/S12)*OUT(20)** (1/3))+ & (OUT(6)*sigma*((OUT(13))**2+(OUT(14))**2)*(OUT(13) & +OUT(14))) C Ug2p OUT(24)=(0.06-(0.017*(beta/90)))*(Ka/OUT(1))*OUT(20)**(1/3)+ & (OUT(5)*sigma*((OUT(14))**2+(OUT(15))**2)*(OUT(14)+OUT(15))) C hr OUT(25)=Eg*sigma*((OUT(13))**4-(OUT(12))**4)/ & (OUT(13)-OUT(9)) C hc OUT(26)=5.7+3.8*Vw C Uga OUT(27)=OUT(25)+OUT(26) C Rb OUT(28)=tetai/tetaz C I OUT(29)=(OUT(28)*(Gr-Dr))+(0.5*(1+COS(beta/57.3))*Dr)+(0.5*0.2* & (1-COS(beta/57.3))*Gr) C Tp OUT(30)=OUT(15)+((Ac*OUT(29)*10*Pabso*Gtrans**2*time)/(p*36))- & (((OUT(22)*Ac*time)/p)*(OUT(15)- OUT(17)))-(((OUT(24)* & Ac*time)/p)*(OUT(15)-OUT(14)))-(((OUT(7)*Ac*time)/p) & *(OUT(15)-OUT(9)))-(((OUT(8)*OUT(4)*time)/p)* & (((OUT(15)+OUT(9))/2)-OUT(9))) C Tf11 OUT(31)=OUT(16)+(((OUT(22)*Ac*time)/a)*(OUT(13)-OUT(16))) & +(((Ac*OUT(22)*time)/a)*(OUT(14)-OUT(16)))-(((OUT(21) & *Cpa*Ac*time)/a)*(OUT(11)-OUT(10))) C Tf21 OUT(32)=OUT(17)+(((OUT(22)*Ac*time)/a)*(OUT(15)-OUT(17))) & +(((OUT(22)*Ac*time)/a)*(OUT(14)-OUT(17)))-(((OUT(21) & *Cpa*Ac)/a)*(OUT(11)-OUT(10))) C Tg11 OUT(33)=OUT(13)+((Ac*OUT(29)*10*(1-Gtrans)*time)/(g*36))- & (((Ac*OUT(23)*time)/g)*(OUT(13)-OUT(14)))-(((Ac*OUT(27) & *time)/g)*(OUT(13)-OUT(9)))-(((OUT(22)*Ac*time)/g)* & (OUT(13)-OUT(16))) C Tg22 OUT(34)=OUT(14)+((OUT(29)*10*(1-Gtrans)*Gtrans*Ac*time)/(g*36)) & -(((Ac*OUT(22)*time)/g)*(OUT(14)-OUT(16)))-(((Ac* & OUT(22)*time)/g)*(OUT(14)-OUT(17)))-(((Ac*OUT(24) & *time)/g)*(OUT(14)-OUT(15)))-(((Ac*OUT(23) & *time)/g)*(OUT(14)-OUT(13))) C Tp1o OUT(35)=(OUT(30)+OUT(15))/2 C Tg220 OUT(36)=(OUT(34)+OUT(14))/2 C Tg11o OUT(37) =(OUT(33)+OUT(13))/2 C Tao00 OUT(38)=(OUT(32)+OUT(9))/2 C Tf110 OUT(39)=(OUT(36)+OUT(37))/2 C Tf220 OUT(40)=(OUT(38)+OUT(9))/2 C Vbeta11 OUT(41)=1/OUT(39) C Vbeta22 OUT(42)=1/OUT(40) C GrL11 OUT(43)=(9.81*OUT(42)*(OUT(35)-OUT(36))*(S12**3)) & /(OUT(2)**2) C Ua1 OUT(44)=0.664*(Ka/Lc)*((Pr*OUT(43)*COS(beta/57.3)) & /(Pr+0.9524))**0.25 C Ug1g22 OUT(45)=((0.06-(0.017*beta/90))*(Ka/S12)*OUT(43)** (1/3))+ & (OUT(6)*sigma*((OUT(37))**2+(OUT(36))**2)*(OUT(36) & +OUT(37))) C Ug2p2 OUT(46)=(0.06-(0.017*(beta/90)))*(Ka/OUT(1))*OUT(20)**(1/3)+ & (OUT(5)*sigma*((OUT(35))**2+(OUT(36))**2)*(OUT(35)+OUT(36))) C hr1 OUT(47)=Eg*sigma*((OUT(37))**4-(OUT(12))**4)/ & (OUT(37)-OUT(9)) C hc1 OUT(48)=5.7+3.8*Vw C Uga1 OUT(49)=OUT(47)+OUT(48) C Rb1 OUT(50)=tetai/tetaz C I1 OUT(51)=(OUT(50)*(Gr-Dr))+(0.5*(1+COS(beta/57.3))*Dr)+(0.5*0.2* & (1-COS(beta/57.3))*Gr) C ma OUT(52)=(Ac/Cpa)*(OUT(51)/(OUT(38)-OUT(10))) C Tp1 OUT(53)=OUT(35)+((Ac*OUT(51)*10*Pabso*Gtrans**2*time)/(p*36))- & (((OUT(44)*Ac*time)/p)*(OUT(35)-OUT(40)))-(((OUT(46)* & Ac*time)/p)*(OUT(35)-OUT(36)))-(((OUT(7)*Ac*time)/p) & *(OUT(35)-OUT(9)))-(((OUT(8)*OUT(4)*time)/p)* & (((OUT(35)+OUT(9))/2)-OUT(9))) C Tf211 OUT(54)=OUT(39)+(((OUT(44)*Ac*time)/a)*(OUT(35)-OUT(40))) & +(((Ac*OUT(44)*time)/a)*(OUT(36)-OUT(40)))-(((OUT(52) & *Cpa*Ac*time)/a)*(OUT(38)-OUT(10))) C Tf111 OUT(55)=OUT(40)+(((OUT(44)*Ac*time)/a)*(OUT(37)-OUT(39))) & +(((OUT(44)*Ac*time)/a)*(OUT(36)-OUT(39)))-(((OUT(52) & *Cpa*Ac)/a)*(OUT(38)-OUT(10))) C Tg111 OUT(56)=OUT(37)+((Ac*OUT(51)*10*(1-Gtrans)*time)/(g*36))- & (((Ac*OUT(45)*time)/g)*(OUT(37)-OUT(36)))-(((Ac*OUT(44) & *time)/g)*(OUT(37)-OUT(9)))-(((OUT(44)*Ac*time)/g)* & (OUT(37)-OUT(39))) C Tg222 OUT(57)=OUT(36)+((OUT(51)*10*(1-Gtrans)*Gtrans*Ac*time)/(g*36)) & -(((Ac*OUT(44)*time)/g)*(OUT(36)-OUT(39)))-(((Ac* & OUT(44)*time)/g)*(OUT(36)-OUT(40)))-(((Ac*OUT(46) & *time)/g)*(OUT(35)-OUT(36)))-(((Ac*OUT(45) & *time)/g)*(OUT(36)-OUT(37))) C Efficiency OUT(58)=(OUT(52)*Cpa*36*(OUT(32)-OUT(9)))/(Ac*OUT(51)*10) C----------------------------------------------------------------------------------------------------------------------- C EVERYTHING IS DONE - RETURN FROM THIS SUBROUTINE AND MOVE ON RETURN 1 END C-----------------------------------------------------------------------------------------------------------------------

Follow-Ups:

Re: [TRNSYS-users] Iwent your help
- From: David Bradley <bradley@tess-inc.com>