Re: [TRNSYS-users] informations

["Diego A. Arias" <daarias@wisc.edu>]

Dear Chiara,

The wizard is a simple way to get you started.  In the wizard, you are 
defining zones in only one floor. You have a couple of options:
- You can define just 1 zone in the wizard, and in TRNBuild, you can add 
a new zone.
- You can define the two zones in the wizard, and in TRNBuild, you have 
to change the adjacent walls, to reflect the real situation: a 
horizontal wall in your first floor (ceiling) will be adjacent with a 
horizontal wall in the second floor (floor).
Best regards,

Diego

chiaralodi1@tiscali.it wrote:
> Dear David,
>
> I am a student of the university of Modena (Italiy). I have started to 
> use trnsys but I need your help.
> In the Building Project (multizone) in the step 2/10 (DRAWING THE 
> FLOOR PLAN) each black square represent a zone, The building that I 
> want to study has 2 floors, if I divide the building in 2 thermal zones 
> (one for the first floor and the other for the second floor), in the 
> BUILDING FLOORPLAN I have  to choose 2 adjacent zones or not?
>
> Thank you very much
>
> Best Regards
>
> Chiara Lodi
>
>
>
>
> ____________________________________________________________
> Naviga e telefona senza limiti con Tiscali     
> Scopri le promozioni Tiscali Adsl: navighi e telefoni senza canone Telecom
>
> http://abbonati.tiscali.it/adsl/
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


--
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706