From: David Bradley <bradley@tess-inc.com>
To: "papia sultana" <papia_s@hotmail.com>,daarias@wisc.edu
CC: trnsys-users@engr.wisc.edu
Subject: Re: [TRNSYS-users] Changing the role of a standard component
Date: Mon, 26 Mar 2007 16:19:46 -0500
Papia,
Type91 calculates the heat transfer rate across the heat exchanger based
on the conditions (temperature and flow rate) at the inlets and on the
effectiveness specified by the user. The place you need to start is with
the 05-Mathematical Description manual to resolve the equations that Type91
uses so that the heat exchange rate is known and some other variable
(outlet temperature of one side of the HX for example) is unknown. As Diego
and I mentioned in our previous emails, you would then need a Fortran
compiler in order to write a new component for TRNSYS.
Kind regards,
David
At 20:32 3/25/2007, papia sultana wrote:
Dear Diego,
Thanx for your interest.
In my problem, I am using 'type 14 h' to read a variable cooling load
(let's
say within 0 to 24 hr). Next, I am linking this to a 'type 91' HE through
an
appropriate equation 'equa' (needed to convert the unit). For the HE of
'type 91', I would like to link the 'cooling load' in terms of 'heat
transfer rate' in the input list. So that new input list could be: heat
transfer rate, hot side flow rate, cold side inlet temp, cold side flow
rate. The output list may remain same or could cut down one/ two. My point
is, how could I modify the component 'type 91' to cop with variable load?
best regards
Papia
>From: "Diego A. Arias" <daarias@wisc.edu>
>To: papia sultana <papia_s@hotmail.com>
>CC: trnsys-users@engr.wisc.edu
>Subject: Re: [TRNSYS-users] Changing the role of a standard component
>Date: Fri, 23 Mar 2007 09:35:30 -0500
>
>Dear Papia,
>
>Changing a component is more than changing the proforma. You need to
>change the mathematical formulation, which is done in a Fortran
compiler.
>If you need to modify a standard component, please feel free to send me
a
>more detailed description of what you need and I may be able to help
you.
>Best regards,
>
>Diego
>
>
>papia sultana wrote:
>>Dear TRNSYS users,
>>
>>I have just started to use TRNSYS for centralized cooling system and I
am
>>just a novice. I would like to know If I change any of the output
variable
>>to an input variable or vice-versa to a component, do I need to
generate
>>new component? If not, I am not able to change any of the variable
>>properties from the Proforma dialogue box even after saving the
changes?
>>
>>btw I will highly appreciate If any body like to share a basic central
>>cooling model with me.
>>
>>Best regards
>>Papia
>>
>>
>
>
>--
>Diego A. Arias
>TRNSYS Coordinator
>Solar Energy Laboratory
>University of Wisconsin - Madison
>1500 Engineering Drive
>Madison, WI 53706
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now!
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 2916 Marketplace Drive - Suite 104
Partner Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley@tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************