[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Type204_phase change materials in walls

To: <trnsys-users@engr.wisc.edu>
Subject: [TRNSYS-users] Type204_phase change materials in walls
From: "Fabien MELENEC" <fabien.melenec@addenda.fr>
Date: Wed, 14 Mar 2007 15:16:26 +0100
List-archive: <https://www.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@engr.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.engr.wisc.edu>
List-post: <mailto:trnsys-users@engr.wisc.edu>
List-subscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@engr.wisc.edu?subject=unsubscribe>

Dear TRNSYS users

I would like to know if it is possible to use more than one Type204 (simulating PCM in wall) in a multizone simulation.

When I run the simulation with one type204 for each zone I have an error message.

Thanks for your help

Best regards

Fabien MELENEC
Tel : 05.62.66.92.53

Sté ADDENDA
Service administratif et direction
RN d'Auch
32300 MIRANDE

Follow-Ups:
- Re: [TRNSYS-users] Type204_phase change materials in walls
  - From: "Diego A. Arias" <daarias@wisc.edu>

Prev by Date: [TRNSYS-users] the plot does not appear
Next by Date: Re: [TRNSYS-users] the plot does not appear
Previous by thread: [TRNSYS-users] the plot does not appear
Next by thread: Re: [TRNSYS-users] Type204_phase change materials in walls
Index(es):
- Date
- Thread