Re: [TRNSYS-users] Type 16 radiation processor

[AIGUASOL <trnsys@aiguasol.com>]

Dear Javier,

I am not sure what are you "named" database.
However, the parameters to put intpoo Type16 are depending of the time
in your experimental data.
If the data are in "solar time", you should put on the 9th parameter -1.
In case that your data are in "local or legal time", you should use 1
and also yuou have to specify the shift in solar time (parameter 7).
How to calculate this value is explained at tyhe Manual 5 (Mathematical
Reference)

In both cases, take care also to feed adequately the Starting day
(parameter 4) and to connect correctely "time of last read and next
read"

Regards,
Jaume Salom




En/na javier mota ha escrit:
> Dear all: 
> I am Javier Mota from 3i-ingenieria, Madrid 
> We are simulating a 2 axis PV central 
> Now, we have experimental data of radiation on horizontal. 
> We must traslate this data to a surface ortogonal to sun position. 
> Then we feed pv with the radiation of this surface. 
> For tis purpose we have a experimental data base with time and
> radiation on horizonta. 
> But type 16, parameter 9, solar time must be at solar time or not. 
> So I have 2 question; once refered to the database that feed type 16 
> and a second refered to the value of parameters and inputs that type
> 16 reads 
> Well, if we have DATA BASE in UTC+1, for Albacete,( the city in spain
> of the PV central), when I feed the type 16 imputs time of las read
> and next read,  should i use in the data base local time LST, this is
> TIME UTC+1 corrected with the longitude parameter and Equation of
> time; and with this time I feed inputs in type 16 ,(time of last read
> and next read)? 
> And then in type 16  Shoul i use parameter solar time =1 and use the
> shift parameter that it should be as the longitude of the local
> meridian as it is explained in manual? 
> Is this way the correct way to proceed? 
> thanks in advance. 
>   
> _________________________________________________________________ 
> Acepta el reto MSN Premium: Correos más divertidos con fotos y textos
> increíbles en MSN Premium. Descárgalo y pruébalo 2 meses gratis.
> http://join.msn.com?XAPID=1697&DI=1055&HL=Footer_mailsenviados_correosmasdivertidos 
>   
> _______________________________________________ 
> TRNSYS-users mailing list 
> TRNSYS-users@engr.wisc.edu 
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users 
>   
>

--

!!! nova adreça !!! nueva dirección !!! new address !!!

________________________________________

 

 

AIGUASOL ENGINYERIA

  

 

C/ Roger de LLúria 29, 3º 2ª    E-08009 BARCELONA            

Tel: (+34) 93.342.47.55       Fax: (+34) 93.342.47.56

E-mail: trnsys@aiguasol.com  

http://www.aiguasol.com

________________________________________