[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] cycle in proforma

Dear Laurent,
I think that it is not possible to dynamically size a cycle from zero. You have to consider that the proforma sends the information to the routine written in Fortran. If you specify n=0, Fortran won't allow you to size an array to zero. I guess that you can create a different proforma and, therefore, another type for the case where this parameter is not needed. 
I hope this helps.  Please let me know if you have other questions.

Diego

Laurent SERRES wrote:


Hi TRNSYS users
I'm creating a new type, and I have some problems.
In the proforma file I want to create a cycle associated with a parameter (n for example) 
The problem occurs when n=0.
In this case in iisibat the input is asked one time (the same that if n=1)
So when I call the typeck subprogram the number of inputs required (considering n=0) is less than the number of inputs specified (considering n=1). Is there sommebody who knows the solution? 
Regards
Laurent
Laurent SERRES 
IUT Génie Civil
3, Rue du Clos Courtel
BP 90422
35704 RENNES CEDEX 7 FRANCE
Tel: (33) 2 23 23 42 02
Fax: (33) 2 23 23 40 51
mèl: laurent.serres@univ-rennes1.fr <mailto:laurent.serres@univ-rennes1.fr> 
web: http://perso.univ-rennes1.fr/laurent.serres

------------------------------------------------------------------------

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users



--

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706