[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Equation

Dear Daniel,
If you have connected an output from a component (say A) as input to another (B), the information that you enter in the 'Input' tab window in component B is used initial values. The information from component A is fed to component B during the next time steps. 
Please let me know if this helps.
Best regards,

Diego


Büchele Daniel wrote:
Is it also possible that if I use an output of a zone as input (in depence of an equation) 
I must give this input a start value ??
How can I do this ???

Thanks in advance

Mit freundlichen Grüssen / Kind regards
Daniel Büchele
Projektingenieur Energie

*Helbling Beratung + Bauplanung AG*
Hohlstrasse 614
CH-8048 Zürich
Telefon +41 44 438 18 64
Telefax +41 44 438 18 10
_mailto:daniel.buechele@helbling.ch__ <__http://www.helbling.ch_ <http://www.helbling.ch/>_>_ 

------------------------------------------------------------------------

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users



--

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706