[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TRNSYS-users] error 23
Dear Transys user-support
Dealing with Trnsys 16 with Iisibat, I receive the following error
message while trying to run a simulation:
*** Fatal Error at time
: 0.000000
Generated by Unit : Not
applicable or not available
Generated by Type : Not
applicable or not available
TRNSYS Message 23 : The
EQUATION processor in TRNSYS has reported an error while trying to
evaluate the listed equation or constant and cannot proceed. Please check
the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
Unable to find the origin of this error, may I ask for your
help?
I send you the .tpf file in attach.
Thanks for your help
Geoffrey van Moeseke, Ir. Architecte
Architecture et Climat, Université Catholique de Louvain
Place du Levant 1,
B-1348 Louvain-La-Neuve
tél : + 32 10 47 21 38
fax : + 32 10 47 21 50
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on jeudi, mars 17, 2005 at 08:19
*** from TrnsysStudio project: C:\simulations\IBGE\deck\Syst01SanMecaTotFroid.TPF
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:iisibat@cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=4344
STOP=13848
STEP=1
* User defined CONSTANTS
CONSTANTS 5
ORI= 130
OMB= 1
GAINS= 0
DIM= 1
TVS= 1
EQUATIONS 13
STARTDAY=INT(START/24)+1
AUVENT = EQL(OMB,2)
STORE = EQL(OMB,3)+EQL(OMB,5)
SROP = EQL(STORE,1)*((1-EQL(OMB,3))+EQL(OMB,5))/2
VIT = (1- EQL(OMB,4))*6001 + EQL(OMB,4)*7001
DAYSIM = OMB*ORI
ORI1 = EQL(ORI,110)*0 + EQL(ORI,130)*90
ORI2 = EQL(ORI,170)*180 + EQL(ORI,190)*270
ORIENT = ORI1+ORI2
AAA = ORIENT
BBB = ORIENT+90
CCC = ORIENT+180
DDD = ORIENT+270
ASSIGN "e:\IBGEsimuls\daysim\Ovcl040.dat" 130
ASSIGN "e:\IBGEsimuls\daysim\Svcl040.dat" 110
ASSIGN "e:\IBGEsimuls\daysim\Eauv040.dat" 380
ASSIGN "e:\IBGEsimuls\daysim\Evcl040.dat" 190
ASSIGN "e:\IBGEsimuls\daysim\Nsto040.dat" 510
ASSIGN "e:\IBGEsimuls\daysim\Nauv040.dat" 340
ASSIGN "e:\IBGEsimuls\daysim\Nvcl040.dat" 170
ASSIGN "e:\IBGEsimuls\daysim\Oauv040.dat" 260
ASSIGN "e:\IBGEsimuls\daysim\Sauv040.dat" 220
ASSIGN "e:\IBGEsimuls\daysim\Evse040.dat" 760
ASSIGN "e:\IBGEsimuls\daysim\Esto040.dat" 570
ASSIGN "e:\IBGEsimuls\daysim\Noex040.dat" 850
ASSIGN "e:\IBGEsimuls\daysim\Nvse040.dat" 680
ASSIGN "e:\IBGEsimuls\daysim\Osto040.dat" 390
ASSIGN "e:\IBGEsimuls\daysim\Svse040.dat" 440
ASSIGN "e:\IBGEsimuls\daysim\Ssto040.dat" 330
ASSIGN "e:\IBGEsimuls\daysim\Ovse040.dat" 520
ASSIGN "e:\IBGEsimuls\daysim\Soex040.dat" 550
ASSIGN "e:\IBGEsimuls\daysim\Ooex040.dat" 650
SIMULATION START STOP STEP ! Start time End time Time step
TOLERANCES 0.001 0.001 ! Integration Convergence
LIMITS 30 30 30 ! Max iterations Max warnings Trace limit
DFQ 1 ! TRNSYS numerical integration solver method
WIDTH 80 ! TRNSYS output file width, number of characters
LIST ! NOLIST statement
MAP ! MAP statement
SOLVER 0 1 1 ! Solver statement Minimum relaxation factor Maximum relaxation factor
NAN_CHECK 0 ! Nan DEBUG statement
OVERWRITE_CHECK 0 ! Overwrite DEBUG statement
EQSOLVER 0 ! EQUATION SOLVER statement
* EQUATIONS "Gains et debit sanitaire"
*
EQUATIONS 20
GNPCBUR = (1-GAINS)*22.32 +GAINS*37.8
GNPCPAY = (1-GAINS)*36 +GAINS*45
GNPCSAL = GAINS*12.24
GNPCKFT = GAINS*69.48
GNHMBUR = (1-GAINS)*15.84 +GAINS*26.64
GNHMPAY = (1-GAINS)*25.2 +GAINS*31.5
GNHMSAL = (1-GAINS)*94.68 +GAINS*126
GNHMKFT = (1-GAINS)*83.88 +GAINS*126
GNHMHMBUR = (1-GAINS)*0.0086 +GAINS*0.0091
GNHMHMPAY = (1-GAINS)*0.01146 +GAINS*0.0123
GNHMHMSAL = (1-GAINS)*0.0215 +GAINS*0.029
GNHMHMKFT = (1-GAINS)*0.0286 +GAINS*0.043
ACHSANBUR = ((1-TVS)*1.25 +TVS*2.5)*[21,1]
ACHSANPAY = ((1-TVS)*1.125 +TVS*2.25)*[21,1]
ACHSANSAL = ((1-TVS)*5 +TVS*8)*[19,1]
ACHSANCHB = ((1-TVS)*0.85 +TVS*1.7)*[8,2]
ACHSANKFT = ((1-TVS)*4.165 +TVS*8.33)*[46,1]
GNHMCHB = [8,2]*((1-GAINS)*16.56+GAINS*19.44)
GNHMHMCHB = 0.0066*[8,2]
GNPCCHB = 20.88*[9,2]
*$UNIT_NAME Gains et debit sanitaire
*$LAYER Main
*$POSITION 846 832
*------------------------------------------------------------------------------
* Model "SaisonChauffe" (Type 14)
*
UNIT 3 TYPE 14 SaisonChauffe
*$UNIT_NAME SaisonChauffe
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 237 192
*$LAYER Main #
PARAMETERS 12
4344 ! 1 Initial value of time
0 ! 2 Initial value of function
6552 ! 3 Time at point-1
0 ! 4 Value at point -1
6553 ! 5 Time at point-2
1 ! 6 Value at point -2
12384 ! 7 Time at point-3
1 ! 8 Value at point -3
12385 ! 9 Time at point-4
0 ! 10 Value at point -4
13848 ! 11 Time at point-5
0 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "ChFr journ Sal" (Type 14)
*
UNIT 4 TYPE 14 ChFr journ Sal
*$UNIT_NAME ChFr journ Sal
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 236 139
*$LAYER Main #
PARAMETERS 12
0 ! 1 Initial value of time
0 ! 2 Initial value of function
7 ! 3 Time at point-1
0 ! 4 Value at point -1
8 ! 5 Time at point-2
1 ! 6 Value at point -2
16 ! 7 Time at point-3
1 ! 8 Value at point -3
17 ! 9 Time at point-4
0 ! 10 Value at point -4
24 ! 11 Time at point-5
0 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "ChFr journ Chb" (Type 14)
*
UNIT 5 TYPE 14 ChFr journ Chb
*$UNIT_NAME ChFr journ Chb
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 314 213
*$LAYER Main #
PARAMETERS 10
0 ! 1 Initial value of time
0 ! 2 Initial value of function
6 ! 3 Time at point-1
0 ! 4 Value at point -1
7 ! 5 Time at point-2
1 ! 6 Value at point -2
23 ! 7 Time at point-3
1 ! 8 Value at point -3
24 ! 9 Time at point-4
0 ! 10 Value at point -4
*------------------------------------------------------------------------------
* Model "ChFr journ Bur Pay Kft" (Type 14)
*
UNIT 6 TYPE 14 ChFr journ Bur Pay Kft
*$UNIT_NAME ChFr journ Bur Pay Kft
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 238 85
*$LAYER Main #
PARAMETERS 12
0 ! 1 Initial value of time
0 ! 2 Initial value of function
7 ! 3 Time at point-1
0 ! 4 Value at point -1
8 ! 5 Time at point-2
1 ! 6 Value at point -2
18 ! 7 Time at point-3
1 ! 8 Value at point -3
19 ! 9 Time at point-4
0 ! 10 Value at point -4
24 ! 11 Time at point-5
0 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "Lux" (Type 9)
*
UNIT 7 TYPE 9 Lux
*$UNIT_NAME Lux
*$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf
*$POSITION 192 597
*$LAYER Main #
PARAMETERS 86
3 ! 1 Mode
4345 ! 2 Header Lines to Skip
20 ! 3 No. of values to read
1 ! 4 Time interval of data
-1 ! 5 Interpolate or not-1
1 ! 6 Multiplication factor-1
0 ! 7 Addition factor-1
0 ! 8 Average or instantaneous value-1
-1 ! 9 Interpolate or not-2
1 ! 10 Multiplication factor-2
0 ! 11 Addition factor-2
0 ! 12 Average or instantaneous value-2
-1 ! 13 Interpolate or not-3
1 ! 14 Multiplication factor-3
0 ! 15 Addition factor-3
0 ! 16 Average or instantaneous value-3
-1 ! 17 Interpolate or not-4
1 ! 18 Multiplication factor-4
0 ! 19 Addition factor-4
0 ! 20 Average or instantaneous value-4
-1 ! 21 Interpolate or not-5
1 ! 22 Multiplication factor-5
0 ! 23 Addition factor-5
0 ! 24 Average or instantaneous value-5
-1 ! 25 Interpolate or not-6
1 ! 26 Multiplication factor-6
0 ! 27 Addition factor-6
0 ! 28 Average or instantaneous value-6
-1 ! 29 Interpolate or not-7
1 ! 30 Multiplication factor-7
0 ! 31 Addition factor-7
0 ! 32 Average or instantaneous value-7
-1 ! 33 Interpolate or not-8
1 ! 34 Multiplication factor-8
0 ! 35 Addition factor-8
0 ! 36 Average or instantaneous value-8
-1 ! 37 Interpolate or not-9
1 ! 38 Multiplication factor-9
0 ! 39 Addition factor-9
0 ! 40 Average or instantaneous value-9
-1 ! 41 Interpolate or not-10
1 ! 42 Multiplication factor-10
0 ! 43 Addition factor-10
0 ! 44 Average or instantaneous value-10
-1 ! 45 Interpolate or not-11
1 ! 46 Multiplication factor-11
0 ! 47 Addition factor-11
0 ! 48 Average or instantaneous value-11
-1 ! 49 Interpolate or not-12
1 ! 50 Multiplication factor-12
0 ! 51 Addition factor-12
0 ! 52 Average or instantaneous value-12
-1 ! 53 Interpolate or not-13
1 ! 54 Multiplication factor-13
0 ! 55 Addition factor-13
0 ! 56 Average or instantaneous value-13
-1 ! 57 Interpolate or not-14
1 ! 58 Multiplication factor-14
0 ! 59 Addition factor-14
0 ! 60 Average or instantaneous value-14
-1 ! 61 Interpolate or not-15
1 ! 62 Multiplication factor-15
0 ! 63 Addition factor-15
0 ! 64 Average or instantaneous value-15
-1 ! 65 Interpolate or not-16
1 ! 66 Multiplication factor-16
0 ! 67 Addition factor-16
0 ! 68 Average or instantaneous value-16
-1 ! 69 Interpolate or not-17
1 ! 70 Multiplication factor-17
0 ! 71 Addition factor-17
0 ! 72 Average or instantaneous value-17
-1 ! 73 Interpolate or not-18
1 ! 74 Multiplication factor-18
0 ! 75 Addition factor-18
0 ! 76 Average or instantaneous value-18
-1 ! 77 Interpolate or not-19
1 ! 78 Multiplication factor-19
0 ! 79 Addition factor-19
0 ! 80 Average or instantaneous value-19
-1 ! 81 Interpolate or not-20
1 ! 82 Multiplication factor-20
0 ! 83 Addition factor-20
0 ! 84 Average or instantaneous value-20
DAYSIM ! 85 Logical unit for input file
-1 ! 86 Free format mode
*** External files
ASSIGN "E:\IBGEsimuls\Daysim\Ovcl040.dat" DAYSIM
*|? Input file name |1000
*------------------------------------------------------------------------------
* Model "OccupChb" (Type 14)
*
UNIT 8 TYPE 14 OccupChb
*$UNIT_NAME OccupChb
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 782 928
*$LAYER Main #
PARAMETERS 12
0 ! 1 Initial value of time
1 ! 2 Initial value of function
8 ! 3 Time at point-1
1 ! 4 Value at point -1
9 ! 5 Time at point-2
GAINS ! 6 Value at point -2
21 ! 7 Time at point-3
GAINS ! 8 Value at point -3
22 ! 9 Time at point-4
1 ! 10 Value at point -4
24 ! 11 Time at point-5
1 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "EquipChb" (Type 14)
*
UNIT 9 TYPE 14 EquipChb
*$UNIT_NAME EquipChb
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 844 960
*$LAYER Main #
PARAMETERS 14
0 ! 1 Initial value of time
0 ! 2 Initial value of function
12 ! 3 Time at point-1
0 ! 4 Value at point -1
13 ! 5 Time at point-2
GAINS ! 6 Value at point -2
21 ! 7 Time at point-3
GAINS ! 8 Value at point -3
22 ! 9 Time at point-4
1 ! 10 Value at point -4
23 ! 11 Time at point-5
0 ! 12 Value at point -5
24 ! 13 Time at point-6
0 ! 14 Value at point -6
*------------------------------------------------------------------------------
* EQUATIONS "Puissance Eclairage"
*
EQUATIONS 24
CompBur = lt(Bur,500)
EclBur = (eql([58,6],8)+eql([58,6],14))*CompBur + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,2] + (EQL([22,2],0) *CompBur))
PeclBur = (1-DIM)*EclBur*36 + DIM*CompBur*((500-Bur)*0.016+2)*3.6
CompAng = lt(Ang,500)
EclAng = (eql([58,6],8)+eql([58,6],14))*CompAng + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,4] + (EQL([22,4],0) *CompAng))
PeclAng = (1-DIM)*EclAng*36 + DIM*CompAng*((500-Ang)*0.016+2)*3.6
CompAsy = lt(Asy,500)
EclAsy = (eql([58,6],8)+eql([58,6],14))*CompAsy + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,6] + (EQL([22,6],0) *CompAsy))
PeclAsy = (1-DIM)*EclAsy*36 + DIM*CompAsy*((500-Asy)*0.016+2)*3.6
CompSym = lt(Sym,500)
EclSym = (eql([58,6],8)+eql([58,6],14))*CompSym + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,8] + (EQL([22,8],0) *CompSym))
PeclSym = (1-DIM)*EclSym*36 + DIM*CompSym*((500-Sym)*0.016+2)*3.6
CompChb = lt(Chb,200)
EclChb = [8,2]*( (eql([58,6],7)+eql([58,6],14)+eql([58,6],21))*CompChb + (gt([58,6],7)*lt([58,6],14)+gt([58,6],14)*lt([58,6],21)+gt([58,6],21)*lt([58,6],23)) * ([22,10] + (EQL([22,10],0) *CompChb)) )
PeclChb = (1-DIM)*EclChb*28.8 + DIM*CompChb*((200-Chb)*0.032+1.6)*3.6
CompKft = lt(Kft,200)
EclKft = (eql([58,6],8)+eql([58,6],14))*CompKft + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,12] + (EQL([22,12],0) *CompKft))
PeclKft = (1-DIM)*EclKft*14.4 + DIM*CompKft*((200-Kft)*0.016+0.8)*3.6
CompSal = lt(Bur,400)
EclSal = (eql([58,6],8)+eql([58,6],14))*CompSal + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,14] + (EQL([22,14],0) *CompSal))
PeclSal = (1-DIM)*EclSal*28.8 + DIM*CompSal*((400-Sal)*0.016+1.6)*3.6
CompToi = lt(Toi,500)
EclToi = (eql([58,6],8)+eql([58,6],14))*CompToi + ( gt([58,6],8)*lt([58,6],14) + gt([58,6],14)*lt([58,6],18)) * ([22,16] + (EQL([22,16],0) *CompToi))
PeclToi = (1-DIM)*EclToi*36 + DIM*CompToi*((500-Toi)*0.016+2)*3.6
*$UNIT_NAME Puissance Eclairage
*$LAYER Main
*$POSITION 379 469
*------------------------------------------------------------------------------
* Model "Calc hum (33c)" (Type 33)
*
UNIT 11 TYPE 33 Calc hum (33c)
*$UNIT_NAME Calc hum (33c)
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 269 285
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
58,1 ! Données météo (9a):Output 1 ->Dry bulb temp.
58,4 ! Données météo (9a):Output 4 ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "Type56b" (Type 56)
*
UNIT 12 TYPE 56 Type56b
*$UNIT_NAME Type56b
*$MODEL .\Loads and Structures\Multi-Zone Building\Without Standard Output Files\Type56b.tmf
*$POSITION 659 341
*$LAYER Main #
*$#
PARAMETERS 3
36 ! 1 Logical unit for building description file (.bui)
0 ! 2 Star network calculation switch
0.5 ! 3 Weighting factor for operative temperature
INPUTS 94
58,1 ! Données météo (9a):Output 1 -> 1- TAMB (AMBIENT TEMPERATURE)
11,6 ! Calc hum (33c):Percent relative humidity -> 2- ARELHUM (RELATIVE AMBIENT HUMIDITY)
13,1 ! T° ciel (69b):Fictive sky temperature -> 3- TSKY (FIKTIVE SKY TEMPERATURE)
14,27 ! Radiations (16g):Total radiation on surface 5 -> 4- ITHORIZONT (INCIDENT RADIATION FOR ORIENTATION HORIZONTAL)
14,7 ! Radiations (16g):Total radiation on surface 1 -> 5- ITAAA (INCIDENT RADIATION FOR ORIENTATION AAA)
14,12 ! Radiations (16g):Total radiation on surface 2 -> 6- ITBBB (INCIDENT RADIATION FOR ORIENTATION BBB)
14,17 ! Radiations (16g):Total radiation on surface 3 -> 7- ITCCC (INCIDENT RADIATION FOR ORIENTATION CCC)
14,22 ! Radiations (16g):Total radiation on surface 4 -> 8- ITDDD (INCIDENT RADIATION FOR ORIENTATION DDD)
14,28 ! Radiations (16g):Beam radiation on surface 5 -> 9- IBHORIZONT (INCIDENT BEAM RADIATION FOR ORIENTATION HORIZONTAL)
14,8 ! Radiations (16g):Beam radiation on surface 1 -> 10- IBAAA (INCIDENT BEAM RADIATION FOR ORIENTATION AAA)
14,13 ! Radiations (16g):Beam radiation on surface 2 -> 11- IBBBB (INCIDENT BEAM RADIATION FOR ORIENTATION BBB)
14,18 ! Radiations (16g):Beam radiation on surface 3 -> 12- IBCCC (INCIDENT BEAM RADIATION FOR ORIENTATION CCC)
14,23 ! Radiations (16g):Beam radiation on surface 4 -> 13- IBDDD (INCIDENT BEAM RADIATION FOR ORIENTATION DDD)
14,30 ! Radiations (16g):Incidence angle of surface 5 -> 14- AIHORIZONT (ANGLE OF INCIDENCE FOR ORIENTATION HORIZONTAL)
14,10 ! Radiations (16g):Incidence angle for surface 1 -> 15- AIAAA (ANGLE OF INCIDENCE FOR ORIENTATION AAA)
14,15 ! Radiations (16g):Incidence angle of surface 2 -> 16- AIBBB (ANGLE OF INCIDENCE FOR ORIENTATION BBB)
14,20 ! Radiations (16g):Incidence angle of surface 3 -> 17- AICCC (ANGLE OF INCIDENCE FOR ORIENTATION CCC)
14,25 ! Radiations (16g):Incidence angle of surface 4 -> 18- AIDDD (ANGLE OF INCIDENCE FOR ORIENTATION DDD)
58,5 ! Données météo (9a):Output 5 -> 19- TSOL (INPUT)
shdBur ! shading factor:shdBur -> 20- SHDBUR (INPUT)
0,0 ! [unconnected] 21- ACHNATBUR (INPUT)
ACHSANBUR ! Gains et debit sanitaire:ACHSANBUR -> 22- ACHSANBUR (INPUT)
0,0 ! [unconnected] 23- ACHNATCHB (INPUT)
ACHSANCHB ! Gains et debit sanitaire:ACHSANCHB -> 24- ACHSANCHB (INPUT)
0,0 ! [unconnected] 25- ACHNATSAL (INPUT)
ACHSANSAL ! Gains et debit sanitaire:ACHSANSAL -> 26- ACHSANSAL (INPUT)
0,0 ! [unconnected] 27- ACHNATPAY (INPUT)
ACHSANPAY ! Gains et debit sanitaire:ACHSANPAY -> 28- ACHSANPAY (INPUT)
0,0 ! [unconnected] 29- ACHNATKFT (INPUT)
ACHSANKFT ! Gains et debit sanitaire:ACHSANKFT -> 30- ACHSANKFT (INPUT)
GNPCBUR ! Gains et debit sanitaire:GNPCBUR -> 31- GNPCBUR (INPUT)
PeclBur ! Puissance Eclairage:PeclBur -> 32- GNLTBUR (INPUT)
GNHMBUR ! Gains et debit sanitaire:GNHMBUR -> 33- GNHMBUR (INPUT)
GNHMHMBUR ! Gains et debit sanitaire:GNHMHMBUR -> 34- GNHMHMBUR (INPUT)
GNPCSAL ! Gains et debit sanitaire:GNPCSAL -> 35- GNPCSAL (INPUT)
PeclSal ! Puissance Eclairage:PeclSal -> 36- GNLTSAL (INPUT)
GNHMSAL ! Gains et debit sanitaire:GNHMSAL -> 37- GNHMSAL (INPUT)
GNHMHMSAL ! Gains et debit sanitaire:GNHMHMSAL -> 38- GNHMHMSAL (INPUT)
GNPCPAY ! Gains et debit sanitaire:GNPCPAY -> 39- GNPCPAY (INPUT)
PeclSym ! Puissance Eclairage:PeclSym -> 40- GNLTSYM (INPUT)
PeclAsy ! Puissance Eclairage:PeclAsy -> 41- GNLTASY (INPUT)
GNHMPAY ! Gains et debit sanitaire:GNHMPAY -> 42- GNHMPAY (INPUT)
GNHMHMPAY ! Gains et debit sanitaire:GNHMHMPAY -> 43- GNHMHMPAY (INPUT)
GNPCCHB ! Gains et debit sanitaire:GNPCCHB -> 44- GNPCCHB (INPUT)
PeclChb ! Puissance Eclairage:PeclChb -> 45- GNLTCHB (INPUT)
GNHMCHB ! Gains et debit sanitaire:GNHMCHB -> 46- GNHMCHB (INPUT)
GNHMHMCHB ! Gains et debit sanitaire:GNHMHMCHB -> 47- GNHMHMCHB (INPUT)
GNPCKFT ! Gains et debit sanitaire:GNPCKFT -> 48- GNPCKFT (INPUT)
PeclKft ! Puissance Eclairage:PeclKft -> 49- GNLTKFT (INPUT)
GNHMKFT ! Gains et debit sanitaire:GNHMKFT -> 50- GNHMKFT (INPUT)
GNHMHMKFT ! Gains et debit sanitaire:GNHMHMKFT -> 51- GNHMHMKFT (INPUT)
NUMFEN ! Constantes:NUMFEN -> 52- NUMFEN (INPUT)
PeclAng ! Puissance Eclairage:PeclAng -> 53- GNLTANG (INPUT)
shdSal ! shading factor:shdSal -> 54- SHDSALA (INPUT)
shdChb ! shading factor:shdChb -> 55- SHDCHB (INPUT)
shdKft ! shading factor:shdKft -> 56- SHDKFT (INPUT)
CSGFRDBUR ! Consigne:CSGFRDBUR -> 57- CSGFRDBUR (INPUT)
PFrBur ! Constantes:PFrBur -> 58- PFRBUR (INPUT)
PFrAsy ! Constantes:PFrAsy -> 59- PFRASY (INPUT)
PFrSym ! Constantes:PFrSym -> 60- PFRSYM (INPUT)
CSGFRDSAL ! Consigne:CSGFRDSAL -> 61- CSGFRDSAL (INPUT)
PFrSal ! Constantes:PFrSal -> 62- PFRSAL (INPUT)
CSGFRDCHB ! Consigne:CSGFRDCHB -> 63- CSGFRDCHB (INPUT)
PFrChb ! Constantes:PFrChb -> 64- PFRCHB (INPUT)
PFrAng ! Constantes:PFrAng -> 65- PFRANG (INPUT)
PFrKft ! Constantes:PFrKft -> 66- PFRKFT (INPUT)
CSGCHABUR ! Consigne:CSGCHABUR -> 67- CSGCHABUR (INPUT)
CSGCHASAL ! Consigne:CSGCHASAL -> 68- CSGCHASAL (INPUT)
CSGCHACHB ! Consigne:CSGCHACHB -> 69- CSGCHACHB (INPUT)
PFrToi ! Constantes:PFrToi -> 70- PFRTOI (INPUT)
shdAngA ! shading factor:shdAngA -> 71- SHDANGA (INPUT)
shdAngb ! shading factor:shdAngb -> 72- SHDANGB (INPUT)
shdToi ! shading factor:shdToi -> 73- SHDTOI (INPUT)
shdSymA ! shading factor:shdSymA -> 74- SHDSYMA (INPUT)
shdSymC ! shading factor:shdSymC -> 75- SHDSYMC (INPUT)
shdAsyA ! shading factor:shdAsyA -> 76- SHDASYA (INPUT)
shdAsyC ! shading factor:shdAsyC -> 77- SHDASYC (INPUT)
PeclToi ! Puissance Eclairage:PeclToi -> 78- GNLTTOI (INPUT)
51,6 ! HumRelPulsAng:Percent relative humidity -> 79- HMSANANG (INPUT)
53,6 ! HumRelPulsAsy:Percent relative humidity -> 80- HMSANASY (INPUT)
43,6 ! HumRelPulsBur:Percent relative humidity -> 81- HMSANBUR (INPUT)
49,6 ! HumRelPulsChb:Percent relative humidity -> 82- HMSANCHB (INPUT)
52,6 ! HumRelPulsKft:Percent relative humidity -> 83- HMSANKFT (INPUT)
50,6 ! HumRelPulsSal:Percent relative humidity -> 84- HMSANSAL (INPUT)
48,6 ! HumRelPulsSym:Percent relative humidity -> 85- HSANSYM (INPUT)
54,6 ! HumRelPulsToi:Percent relative humidity -> 86- HMSANTOI (INPUT)
TpulsBur ! Puls San Meca:TpulsBur -> 87- TPULSSANBU (INPUT)
TpulsAng ! Puls San Meca:TpulsAng -> 88- TPULSSANAN (INPUT)
TpulsToi ! Puls San Meca:TpulsToi -> 89- TPULSSANTO (INPUT)
TpulsSal ! Puls San Meca:TpulsSal -> 90- TPULSSANSA (INPUT)
TpulsChb ! Puls San Meca:TpulsChb -> 91- TPULSSANCH (INPUT)
TpulsSym ! Puls San Meca:TpulsSym -> 92- TPULSSANSY (INPUT)
TpulsKft ! Puls San Meca:TpulsKft -> 93- TPULSSANKF (INPUT)
TpulsAsy ! Puls San Meca:TpulsAsy -> 94- TPULSSANAS (INPUT)
*** INITIAL INPUT VALUES
22 40 -273.149994 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** External files
ASSIGN "E:\IBGEsimuls\Trnbuild\Isol1Inert1Surfv1Slab0.bui" 36
*|? Building description file (*.bui) |1000
*------------------------------------------------------------------------------
* Model "T° ciel (69b)" (Type 69)
*
UNIT 13 TYPE 69 T° ciel (69b)
*$UNIT_NAME T° ciel (69b)
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf
*$POSITION 262 415
*$LAYER Main #
PARAMETERS 2
0 ! 1 mode for cloudiness factor
80 ! 2 height over sea level
INPUTS 4
11,7 ! Calc hum (33c):Dry bulb temperature ->Ambient temperature
11,8 ! Calc hum (33c):Dew point temperature. ->Dew point temperature at ambient conditions
14,5 ! Radiations (16g):Beam radiation on horizontal ->Beam radiation on the horizontal
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Diffuse radiation on the horizontal
*** INITIAL INPUT VALUES
7 4 0 0
*------------------------------------------------------------------------------
* Model "Radiations (16g)" (Type 16)
*
UNIT 14 TYPE 16 Radiations (16g)
*$UNIT_NAME Radiations (16g)
*$MODEL .\Physical Phenomena\Radiation Processors\Total Horiz, Direct Normal Known (Mode=4)\TYPE16g.tmf
*$POSITION 263 352
*$LAYER Main #
PARAMETERS 9
4 ! 1 Horiz. radiation mode
1 ! 2 Tracking mode
4 ! 3 Tilted surface mode
STARTDAY ! 4 Starting day
50.78 ! 5 Latitude
4871 ! 6 Solar constant
-25.6 ! 7 Shift in solar time
2 ! 8 Not used
1 ! 9 Solar time?
INPUTS 15
58,3 ! Données météo (9a):Output 3 ->Total radiation on horizontal surface
58,2 ! Données météo (9a):Output 2 ->Direct normal beam radiation
58,99 ! Données météo (9a):Time of last read ->Time of last data read
58,100 ! Données météo (9a):Time of next read ->Time of next data read
0,0 ! [unconnected] Ground reflectance
0,0 ! [unconnected] Slope of surface-1
0,0 ! [unconnected] Azimuth of surface-1
0,0 ! [unconnected] Slope of surface-2
0,0 ! [unconnected] Azimuth of surface-2
0,0 ! [unconnected] Slope of surface-3
0,0 ! [unconnected] Azimuth of surface-3
0,0 ! [unconnected] Slope of surface-4
0,0 ! [unconnected] Azimuth of surface-4
0,0 ! [unconnected] Slope of surface-5
0,0 ! [unconnected] Azimuth of surface-5
*** INITIAL INPUT VALUES
0 0 0 1 0.2 90 AAA 90 BBB 90 CCC 90 DDD 0 0
*------------------------------------------------------------------------------
* EQUATIONS "Consigne"
*
EQUATIONS 6
CSGFRDBUR = [57,2]+(6*(1-[18,1]))
CSGFRDCHB = [57,2]
CSGFRDSAL = [57,2]+(6*(1-[17,1]))
CSGCHABUR = [3,2]*(15+[18,1]*5.5)
CSGCHACHB = (1-GAINS)* [3,2]*(18+[5,2]*2.5) + GAINS*(20+[5,2]*2.5)
CSGCHASAL = [3,2]*(15+[17,1]*5.5)
*$UNIT_NAME Consigne
*$LAYER Main
*$POSITION 462 139
*------------------------------------------------------------------------------
* Model "Type25a" (Type 25)
*
UNIT 16 TYPE 25 Type25a
*$UNIT_NAME Type25a
*$MODEL .\Output\Printer\TRNSYS-Supplied Units\Type25a.tmf
*$POSITION 989 395
*$LAYER Main #
PARAMETERS 10
STEP ! 1 Printing interval
START ! 2 Start time
STOP ! 3 Stop time
37 ! 4 Logical unit
2 ! 5 Units printing mode
0 ! 6 Relative or absolute start time
-1 ! 7 Overwrite or Append
-1 ! 8 Print header
0 ! 9 Delimiter
1 ! 10 Print labels
INPUTS 14
TestHumidif ! Puls San Meca:TestHumidif ->Input to be printed-1
TestDeshumBur ! Puls San Meca:TestDeshumBur ->Input to be printed-2
TpulsBur ! Puls San Meca:TpulsBur ->Input to be printed-3
HabsPulsHum ! Puls San Meca:HabsPulsHum ->Input to be printed-4
HabsPulsDeshum ! Puls San Meca:HabsPulsDeshum ->Input to be printed-5
HabsPulsBur ! Puls San Meca:HabsPulsBur ->Input to be printed-6
QprchAirBur ! Puls San Meca:QprchAirBur ->Input to be printed-7
QhumBur ! Puls San Meca:QhumBur ->Input to be printed-8
QchAirBur ! Puls San Meca:QchAirBur ->Input to be printed-9
QrefAirBur ! Puls San Meca:QrefAirBur ->Input to be printed-10
QdeshumBur ! Puls San Meca:QdeshumBur ->Input to be printed-11
12,1 ! Type56b: 1- (air temperature of zone) TAIR 1 ->Input to be printed-12
12,33 ! Type56b: 33- (operative room temperatu...) TOP 1 ->Input to be printed-13
12,41 ! Type56b: 41- (mean surface temperature) TMSURF 1 ->Input to be printed-14
*** INITIAL INPUT VALUES
testhumidif testdeshumbur Tpulsbur Habspulshum Habspulsdeshum habspulsbur
qprchairbur qhumbur qchairbur qrefairbur qdeshumbur Tintbur TopBur
TwalBur
*** External files
ASSIGN "resultats" 37
*|? Output File for printed results |1000
*------------------------------------------------------------------------------
* Model "we Sal" (Type 41)
*
UNIT 17 TYPE 41 we Sal
*$UNIT_NAME we Sal
*$MODEL .\Utility\Forcing Function Sequencers\Weekdays and Weekends\Type41a.tmf
*$POSITION 324 139
*$LAYER Main #
PARAMETERS 8
1 ! 1 Number of profiles for each day
1 ! 2 Input set for day 1
1 ! 3 Input set for day 2
1 ! 4 Input set for day 3
1 ! 5 Input set for day 4
1 ! 6 Input set for day 5
2 ! 7 Input set for day 6
2 ! 8 Input set for day 7
INPUTS 2
4,2 ! ChFr journ Sal:Instantaneous value of function over the timestep ->Weekday input
0,0 ! [unconnected] Weekend input
*** INITIAL INPUT VALUES
0 0
*------------------------------------------------------------------------------
* Model "we Bur" (Type 41)
*
UNIT 18 TYPE 41 we Bur
*$UNIT_NAME we Bur
*$MODEL .\Utility\Forcing Function Sequencers\Weekdays and Weekends\Type41a.tmf
*$POSITION 325 85
*$LAYER Main #
PARAMETERS 8
1 ! 1 Number of profiles for each day
1 ! 2 Input set for day 1
1 ! 3 Input set for day 2
1 ! 4 Input set for day 3
1 ! 5 Input set for day 4
1 ! 6 Input set for day 5
2 ! 7 Input set for day 6
2 ! 8 Input set for day 7
INPUTS 2
6,2 ! ChFr journ Bur Pay Kft:Instantaneous value of function over the timestep ->Weekday input
0,0 ! [unconnected] Weekend input
*** INITIAL INPUT VALUES
0 0
*------------------------------------------------------------------------------
* Model "we Salle" (Type 41)
*
UNIT 19 TYPE 41 we Salle
*$UNIT_NAME we Salle
*$MODEL .\Utility\Forcing Function Sequencers\Weekdays and Weekends\Type41a.tmf
*$POSITION 647 928
*$LAYER Main #
PARAMETERS 8
1 ! 1 Number of profiles for each day
1 ! 2 Input set for day 1
1 ! 3 Input set for day 2
1 ! 4 Input set for day 3
1 ! 5 Input set for day 4
1 ! 6 Input set for day 5
2 ! 7 Input set for day 6
2 ! 8 Input set for day 7
INPUTS 2
56,2 ! occup Sal:Instantaneous value of function over the timestep ->Weekday input
0,0 ! [unconnected] Weekend input
*** INITIAL INPUT VALUES
0 0
*------------------------------------------------------------------------------
* EQUATIONS "gestion Store"
*
EQUATIONS 25
TestIrradAAA = gt([14,7],900)
SFbur = [30,1]*TestIrradAAA*0.82
FermStBur = [30,1]*TestIrradAAA*[21,1]*STORE
TestIrradBBB = gt([14,12],900)
TestIrradCCC = gt([14,17],900)
SFangA = [29,1]*TestIrradAAA*0.82
SFangB = [29,1]*TestIrradBBB*0.82
SFtoi = [25,1]*TestIrradAAA*0.82
SFasyA = [28,1]*TestIrradAAA*0.82
SFasyC = [28,1]*TestIrradCCC*0.82
SFsymA = [24,1]*TestIrradAAA*0.82
SFsymC = [24,1]*TestIrradCCC*0.82
SFchb = [27,1]*TestIrradAAA*0.82
SFkft = [23,1]*TestIrradAAA*0.82
SFsal = [26,1]*TestIrradAAA*0.82
FermStAngA = [29,1]*TestIrradAAA*[21,1]*STORE
FermStAngB = [29,1]*TestIrradBBB*[21,1]*STORE
FermStToi = [25,1]*TestIrradAAA*[21,1]*STORE
FermStAsyA = [28,1]*TestIrradAAA*[21,1]*STORE
FermStAsyC = [28,1]*TestIrradCCC*[21,1]*STORE
FermStSymA = [24,1]*TestIrradAAA*[21,1]*STORE
FermStSymC = [24,1]*TestIrradCCC*[21,1]*STORE
FermStChb = [27,1]*TestIrradAAA*[8,2]*STORE
FermStSal = [26,1]*TestIrradAAA*[19,1]*STORE
FermStKft = [23,1]*TestIrradAAA*[21,1]*STORE
*$UNIT_NAME gestion Store
*$LAYER Main
*$POSITION 661 853
*------------------------------------------------------------------------------
* Model "weBur" (Type 41)
*
UNIT 21 TYPE 41 weBur
*$UNIT_NAME weBur
*$MODEL .\Utility\Forcing Function Sequencers\Weekdays and Weekends\Type41a.tmf
*$POSITION 590 949
*$LAYER Main #
PARAMETERS 8
1 ! 1 Number of profiles for each day
1 ! 2 Input set for day 1
1 ! 3 Input set for day 2
1 ! 4 Input set for day 3
1 ! 5 Input set for day 4
1 ! 6 Input set for day 5
2 ! 7 Input set for day 6
2 ! 8 Input set for day 7
INPUTS 2
55,2 ! occup Bur Pay:Instantaneous value of function over the timestep ->Weekday input
0,0 ! [unconnected] Weekend input
*** INITIAL INPUT VALUES
0 0
*------------------------------------------------------------------------------
* Model "ahp Bur" (Type 93)
*
UNIT 22 TYPE 93 ahp Bur
*$UNIT_NAME ahp Bur
*$MODEL .\Utility\Input Value Recall\Type93.tmf
*$POSITION 390 615
*$LAYER Main #
PARAMETERS 2
8 ! 1 Number of inputs to be stored
2 ! 2 Number of timesteps to be stored
INPUTS 8
EclBur ! Puissance Eclairage:EclBur ->Input value-1
EclAng ! Puissance Eclairage:EclAng ->Input value-2
EclAsy ! Puissance Eclairage:EclAsy ->Input value-3
EclSym ! Puissance Eclairage:EclSym ->Input value-4
EclChb ! Puissance Eclairage:EclChb ->Input value-5
EclKft ! Puissance Eclairage:EclKft ->Input value-6
EclSal ! Puissance Eclairage:EclSal ->Input value-7
EclToi ! Puissance Eclairage:EclToi ->Input value-8
*** INITIAL INPUT VALUES
0 0 0 0 0 0 0 0
*------------------------------------------------------------------------------
* Model "gest st kft" (Type 2)
*
UNIT 23 TYPE 2 gest st kft
*$UNIT_NAME gest st kft
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 289 875
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,7 ! Type56b: 7- (air temperature of zone) TAIR 7 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
23,1 ! gest st kft:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 22 21
*------------------------------------------------------------------------------
* Model "gest st sym" (Type 2)
*
UNIT 24 TYPE 2 gest st sym
*$UNIT_NAME gest st sym
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 229 875
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,6 ! Type56b: 6- (air temperature of zone) TAIR 6 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
24,1 ! gest st sym:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "gest st Toi" (Type 2)
*
UNIT 25 TYPE 2 gest st Toi
*$UNIT_NAME gest st Toi
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 408 928
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,3 ! Type56b: 3- (air temperature of zone) TAIR 3 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
25,1 ! gest st Toi:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "gest st sal" (Type 2)
*
UNIT 26 TYPE 2 gest st sal
*$UNIT_NAME gest st sal
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 353 928
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,4 ! Type56b: 4- (air temperature of zone) TAIR 4 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
26,1 ! gest st sal:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "gest st Chb" (Type 2)
*
UNIT 27 TYPE 2 gest st Chb
*$UNIT_NAME gest st Chb
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 293 928
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,5 ! Type56b: 5- (air temperature of zone) TAIR 5 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
27,1 ! gest st Chb:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 24 21
*------------------------------------------------------------------------------
* Model "gest st asy" (Type 2)
*
UNIT 28 TYPE 2 gest st asy
*$UNIT_NAME gest st asy
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 227 928
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,8 ! Type56b: 8- (air temperature of zone) TAIR 8 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
28,1 ! gest st asy:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "gest st Ang" (Type 2)
*
UNIT 29 TYPE 2 gest st Ang
*$UNIT_NAME gest st Ang
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 405 875
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,2 ! Type56b: 2- (air temperature of zone) TAIR 2 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
29,1 ! gest st Ang:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "gest st bur" (Type 2)
*
UNIT 30 TYPE 2 gest st bur
*$UNIT_NAME gest st bur
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 344 875
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
5 ! 1 No. of oscillations
100.0 ! 2 High limit cut-out
INPUTS 6
12,1 ! Type56b: 1- (air temperature of zone) TAIR 1 ->Upper input temperature Th
0,0 ! [unconnected] Lower input temperature Tl
0,0 ! [unconnected] Monitoring temperature Tin
30,1 ! gest st bur:Output control function ->Input control function
0,0 ! [unconnected] Upper dead band dT
0,0 ! [unconnected] Lower dead band dT
*** INITIAL INPUT VALUES
20.0 0 100 0 23 21
*------------------------------------------------------------------------------
* Model "AngB" (Type 34)
*
UNIT 31 TYPE 34 AngB
*$UNIT_NAME AngB
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 193 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.4 ! 2 Receiver height
4.2 ! 3 Receiver width
0.7 ! 4 Overhang projection
0 ! 5 Overhang gap
0.7 ! 6 Overhang left extension
0.7 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
BBB ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,13 ! Radiations (16g):Beam radiation on surface 2 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,15 ! Radiations (16g):Incidence angle of surface 2 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "Kft" (Type 34)
*
UNIT 32 TYPE 34 Kft
*$UNIT_NAME Kft
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 477 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.85 ! 2 Receiver height
6.9 ! 3 Receiver width
0.95 ! 4 Overhang projection
0 ! 5 Overhang gap
0.95 ! 6 Overhang left extension
0.95 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "Sal" (Type 34)
*
UNIT 33 TYPE 34 Sal
*$UNIT_NAME Sal
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 445 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.4 ! 2 Receiver height
9 ! 3 Receiver width
0.7 ! 4 Overhang projection
0 ! 5 Overhang gap
0.7 ! 6 Overhang left extension
0.7 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "SymC" (Type 34)
*
UNIT 34 TYPE 34 SymC
*$UNIT_NAME SymC
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 406 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.85 ! 2 Receiver height
6.9 ! 3 Receiver width
0.95 ! 4 Overhang projection
0 ! 5 Overhang gap
0.95 ! 6 Overhang left extension
0.95 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
CCC ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,18 ! Radiations (16g):Beam radiation on surface 3 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,20 ! Radiations (16g):Incidence angle of surface 3 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "SymA" (Type 34)
*
UNIT 35 TYPE 34 SymA
*$UNIT_NAME SymA
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 364 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.85 ! 2 Receiver height
6.9 ! 3 Receiver width
0.95 ! 4 Overhang projection
0 ! 5 Overhang gap
0.95 ! 6 Overhang left extension
0.95 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "AsyC" (Type 34)
*
UNIT 36 TYPE 34 AsyC
*$UNIT_NAME AsyC
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 321 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
2.1 ! 2 Receiver height
10.8 ! 3 Receiver width
1.1 ! 4 Overhang projection
0 ! 5 Overhang gap
1.1 ! 6 Overhang left extension
1.1 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
CCC ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,18 ! Radiations (16g):Beam radiation on surface 3 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,20 ! Radiations (16g):Incidence angle of surface 3 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "AsyA" (Type 34)
*
UNIT 37 TYPE 34 AsyA
*$UNIT_NAME AsyA
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 279 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.85 ! 2 Receiver height
6.9 ! 3 Receiver width
0.95 ! 4 Overhang projection
0 ! 5 Overhang gap
0.95 ! 6 Overhang left extension
0.95 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* Model "Chb" (Type 34)
*
UNIT 38 TYPE 34 Chb
*$UNIT_NAME Chb
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 243 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.9 ! 2 Receiver height
2.1 ! 3 Receiver width
0.95 ! 4 Overhang projection
0 ! 5 Overhang gap
0 ! 6 Overhang left extension
0.95 ! 7 Overhang right extension
0.95 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* EQUATIONS "shading factor"
*
EQUATIONS 11
shdBur = (1-SROP)*SFbur+SROP+ AUVENT*[41,11]
shdAngA = (1-SROP)*SFangA+SROP+ AUVENT*[41,11]
shdAngb = (1-SROP)*SFangB+SROP+ AUVENT*[31,11]
shdToi = (1-SROP)*SFtoi+SROP+ AUVENT*[41,11]
shdChb = (1-SROP)*SFchb+SROP + AUVENT*[38,11]
shdAsyA = (1-SROP)*SFasyA+SROP+ AUVENT*[37,11]
shdAsyC = (1-SROP)*SFasyC+SROP+AUVENT*[36,11]
shdSymA = (1-SROP)*SFsymA+SROP+ AUVENT*[35,11]
shdSymC = (1-SROP)*SFsymC+SROP+ AUVENT*[34,11]
shdSal = (1-SROP)*SFsal+SROP+ AUVENT*[33,11]
shdKft = (1-SROP)*SFkft+SROP+ AUVENT*[32,11]
*$UNIT_NAME shading factor
*$LAYER Main
*$POSITION 632 757
*------------------------------------------------------------------------------
* EQUATIONS "CombiStoresLux"
*
EQUATIONS 8
Ang = (1-STORE)*[7,4]+ STORE*(1-SROP)*( FermStAngA*(FermStAngB*[7,4]+(1-FermStAngB)*[7,1]) +(1-FermStAngA)*(FermStAngB*[7,2]+(1-FermStAngB)*[7,3]))+ STORE*(SROP)*[7,4]
Sym = (1-STORE)*[7,20]+ STORE*(1-SROP)*( FermStSymA*(FermStSymC*[7,20]+(1-FermStSymC)*[7,17]) +(1-FermStSymA)*(FermStSymC*[7,18]+(1-FermStSymC)*[7,19]))+ STORE*SROP*[7,20]
Asy = (1-STORE)*[7,8]+ STORE*(1-SROP)*( FermStAsyA*(FermStAsyC*[7,8]+(1-FermStAsyC)*[7,5]) +(1-FermStAsyA)*(FermStAsyC*[7,6]+(1-FermStAsyC)*[7,7]))+ STORE*SROP*[7,8]
Bur = (1-STORE)*[7,10]+ STORE*(1-SROP)*(FermStBur*[7,10]+(1-FermStBur)*[7,9])+ STORE*SROP*[7,10]
Chb = (1-STORE)*[7,12]+ STORE*(1-SROP)*(FermStChb*[7,12]+(1-FermStChb)*[7,11])+ STORE*SROP*[7,12]
Kft = (1-STORE)*[7,14]+ STORE*(1-SROP)*(FermStKft*[7,14]+(1-FermStKft)*[7,13])+ STORE*SROP*[7,14]
Sal = (1-STORE)*[7,16]+ STORE*(1-SROP)*(FermStSal*[7,16]+(1-FermStSal)*[7,15])+ STORE*SROP*[7,16]
Toi = (1-STORE)*[7,10]+ STORE*(1-SROP)*(FermStToi*[7,10]+(1-FermStToi)*[7,9])+ STORE*SROP*[7,10]
*$UNIT_NAME CombiStoresLux
*$LAYER Main
*$POSITION 242 523
*------------------------------------------------------------------------------
* Model "Bur" (Type 34)
*
UNIT 41 TYPE 34 Bur
*$UNIT_NAME Bur
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf
*$POSITION 510 789
*$LAYER Main #
PARAMETERS 16
0 ! 1 Upstream component mode
1.4 ! 2 Receiver height
2.8 ! 3 Receiver width
0.7 ! 4 Overhang projection
0 ! 5 Overhang gap
0.7 ! 6 Overhang left extension
0.7 ! 7 Overhang right extension
0 ! 8 Left wingwall projection
0 ! 9 Left wingwall gap
0 ! 10 Left wingwall top extension
0 ! 11 Left wingwall bottom extension
0 ! 12 Right wingwall projection
0 ! 13 Right wingwall gap
0 ! 14 Right wingwall top extension
0 ! 15 Right wingwall bottom extension
AAA ! 16 Receiver azimuth
INPUTS 7
14,2 ! Radiations (16g):Solar zenith angle ->Solar zenith angle
14,3 ! Radiations (16g):Solar azimuth angle ->Solar azimuth angle
14,4 ! Radiations (16g):Total horizontal radiation ->Total horizontal radiation
14,6 ! Radiations (16g):Horizontal diffuse radiation ->Horizontal diffuse radiation
14,8 ! Radiations (16g):Beam radiation on surface 1 ->Beam radiation on surface
0,0 ! [unconnected] Ground reflectance
14,10 ! Radiations (16g):Incidence angle for surface 1 ->Incidence angle of direct radiation
*** INITIAL INPUT VALUES
45.0 0.0 0.0 0.0 0.0 0.2 0
*------------------------------------------------------------------------------
* EQUATIONS "Puls San Meca"
*
EQUATIONS 32
TestHumidif = lt([11,1],0.0044)
TestDeshumBur = gt(TintBur,CsfrBur)
TestDeshumAng = gt(TintAng,CsfrBur)
TestDeshumToi = gt(TintToi,CsfrBur)
TestDeshumSal = gt(TintSal,CsfrSal)
TestDeshumChb = gt(TintChb,CsfrChb)
TestDeshumSym = gt(TintSym,CsfrBur)
TestDeshumKft = gt(TintKft,CsfrBur)
TestDeshumAsy = gt(TintAsy,CsfrBur)
TpulsBur = (1-TestDeshumBur)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumBur*14
TpulsAng = (1-TestDeshumAng)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumAng*14
TpulsToi = (1-TestDeshumToi)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumToi*14
TpulsSal = (1-TestDeshumSal)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumSal*14
TpulsChb = (1-TestDeshumChb)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumChb*14
TpulsSym = (1-TestDeshumSym)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumSym*14
TpulsKft = (1-TestDeshumKft)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumKft*14
TpulsAsy = (1-TestDeshumAsy)*(lt([58,1],13)*14+(1-lt([58,1],13))*([58,1]+1)) +TestDeshumAsy*14
HabsPulsHum = (1-TVS)*0.0044 +TVS*0.0052
HabsPulsDeshum = gt([11,1],0.008)*0.008 +(1-gt([11,1],0.008))*[11,1]
HabsPulsBur = TestHumidif*(1-TestDeshumBur)*HabsPulsHum +TestDeshumBur*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumBur*HabsPulsDeshum +*(1-TestDeshumBur)*(1-TestHumidif)*[11,1]
HabsPulsAng = TestHumidif*(1-TestDeshumAng)*HabsPulsHum +TestDeshumAng*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumAng*HabsPulsDeshum +*(1-TestDeshumAng)*(1-TestHumidif)*[11,1]
HabsPulsToi = TestHumidif*(1-TestDeshumToi)*HabsPulsHum +TestDeshumToi*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumToi*HabsPulsDeshum +*(1-TestDeshumToi)*(1-TestHumidif)*[11,1]
HabsPulsSal = TestHumidif*(1-TestDeshumSal)*HabsPulsHum +TestDeshumSal*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumSal*HabsPulsDeshum +*(1-TestDeshumSal)*(1-TestHumidif)*[11,1]
HabsPulsChb = TestHumidif*(1-TestDeshumChb)*HabsPulsHum +TestDeshumChb*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumChb*HabsPulsDeshum +*(1-TestDeshumChb)*(1-TestHumidif)*[11,1]
HabsPulsSym = TestHumidif*(1-TestDeshumSym)*HabsPulsHum +TestDeshumSym*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumSym*HabsPulsDeshum +*(1-TestDeshumSym)*(1-TestHumidif)*[11,1]
HabsPulsKft = TestHumidif*(1-TestDeshumKft)*HabsPulsHum +TestDeshumKft*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumKft*HabsPulsDeshum +*(1-TestDeshumKft)*(1-TestHumidif)*[11,1]
HabsPulsAsy = TestHumidif*(1-TestDeshumAsy)*HabsPulsHum +TestDeshumAsy*(1-TestHumidif)*HabsPulsDeshum +TestHumidif*TestDeshumAsy*HabsPulsDeshum +*(1-TestDeshumAsy)*(1-TestHumidif)*[11,1]
QprchAirBur = (1-TestDeshumBur)*lt([58,1],13)*ACHSANBUR *52.488*0.34*(13-[58,1])*3.6
QhumBur = TestHumidif*(0.0044-[11,1])*1000*(ACHSANBUR*52.488* 1.2*2.5)
QchAirBur = lt(TpulsBur,CSGCHABUR)*(1-TestDeshumBur)*ACHSANBUR*52.488*0.34*(CSGCHABUR-TpulsBur)*3.6
QrefAirBur = (TestDeshumBur)*ACHSANBUR*52.488*0.34*([58,1]-13)*3.6
QdeshumBur = 0
*$UNIT_NAME Puls San Meca
*$LAYER Main
*$POSITION 645 544
*------------------------------------------------------------------------------
* Model "HumRelPulsBur" (Type 33)
*
UNIT 43 TYPE 33 HumRelPulsBur
*$UNIT_NAME HumRelPulsBur
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 592 434
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsBur ! Puls San Meca:TpulsBur ->Dry bulb temp.
HabsPulsBur ! Puls San Meca:HabsPulsBur ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* EQUATIONS "Constantes"
*
EQUATIONS 9
PFrBur = 1000000
PFrChb = 1000000
PFrSal = 1000000
PFrAng = 1000000
PFrToi = 1000000
PFrKft = 1000000
PFrSym = 1000000
PFrAsy = 1000000
NUMFEN = VIT
*$UNIT_NAME Constantes
*$LAYER Main
*$POSITION 528 53
*------------------------------------------------------------------------------
* Model "Sanitaire Kft" (Type 14)
*
UNIT 45 TYPE 14 Sanitaire Kft
*$UNIT_NAME Sanitaire Kft
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 956 949
*$LAYER Main #
PARAMETERS 18
0 ! 1 Initial value of time
0 ! 2 Initial value of function
8 ! 3 Time at point-1
0 ! 4 Value at point -1
9 ! 5 Time at point-2
1 ! 6 Value at point -2
10 ! 7 Time at point-3
0 ! 8 Value at point -3
12 ! 9 Time at point-4
0 ! 10 Value at point -4
13 ! 11 Time at point-5
1 ! 12 Value at point -5
14 ! 13 Time at point-6
1 ! 14 Value at point -6
15 ! 15 Time at point-7
0 ! 16 Value at point -7
24 ! 17 Time at point-8
0 ! 18 Value at point -8
*------------------------------------------------------------------------------
* Model "we Kft" (Type 41)
*
UNIT 46 TYPE 41 we Kft
*$UNIT_NAME we Kft
*$MODEL .\Utility\Forcing Function Sequencers\Weekdays and Weekends\Type41a.tmf
*$POSITION 942 862
*$LAYER Main #
PARAMETERS 8
1 ! 1 Number of profiles for each day
1 ! 2 Input set for day 1
1 ! 3 Input set for day 2
1 ! 4 Input set for day 3
1 ! 5 Input set for day 4
1 ! 6 Input set for day 5
2 ! 7 Input set for day 6
2 ! 8 Input set for day 7
INPUTS 2
45,2 ! Sanitaire Kft:Instantaneous value of function over the timestep ->Weekday input
0,0 ! [unconnected] Weekend input
*** INITIAL INPUT VALUES
0 0
*------------------------------------------------------------------------------
* Model "resultats" (Type 25)
*
UNIT 47 TYPE 25 resultats
*$UNIT_NAME resultats
*$MODEL .\Output\Printer\TRNSYS-Supplied Units\Type25a.tmf
*$POSITION 1085 533
*$LAYER Main #
PARAMETERS 10
STEP ! 1 Printing interval
START ! 2 Start time
STOP ! 3 Stop time
38 ! 4 Logical unit
2 ! 5 Units printing mode
0 ! 6 Relative or absolute start time
-1 ! 7 Overwrite or Append
-1 ! 8 Print header
0 ! 9 Delimiter
1 ! 10 Print labels
INPUTS 76
12,17 ! Type56b: 17- (heating demand) QHEAT 1 ->Input to be printed-1
12,18 ! Type56b: 18- (heating demand) QHEAT 2 ->Input to be printed-2
12,19 ! Type56b: 19- (heating demand) QHEAT 3 ->Input to be printed-3
12,20 ! Type56b: 20- (heating demand) QHEAT 4 ->Input to be printed-4
12,21 ! Type56b: 21- (heating demand) QHEAT 5 ->Input to be printed-5
12,22 ! Type56b: 22- (heating demand) QHEAT 6 ->Input to be printed-6
12,23 ! Type56b: 23- (heating demand) QHEAT 7 ->Input to be printed-7
12,24 ! Type56b: 24- (heating demand) QHEAT 8 ->Input to be printed-8
12,25 ! Type56b: 25- (cooling demand) QCOOL 1 ->Input to be printed-9
12,26 ! Type56b: 26- (cooling demand) QCOOL 2 ->Input to be printed-10
12,27 ! Type56b: 27- (cooling demand) QCOOL 3 ->Input to be printed-11
12,28 ! Type56b: 28- (cooling demand) QCOOL 4 ->Input to be printed-12
12,29 ! Type56b: 29- (cooling demand) QCOOL 5 ->Input to be printed-13
12,30 ! Type56b: 30- (cooling demand) QCOOL 6 ->Input to be printed-14
12,31 ! Type56b: 31- (cooling demand) QCOOL 7 ->Input to be printed-15
12,32 ! Type56b: 32- (cooling demand) QCOOL 8 ->Input to be printed-16
12,1 ! Type56b: 1- (air temperature of zone) TAIR 1 ->Input to be printed-17
12,2 ! Type56b: 2- (air temperature of zone) TAIR 2 ->Input to be printed-18
12,3 ! Type56b: 3- (air temperature of zone) TAIR 3 ->Input to be printed-19
12,4 ! Type56b: 4- (air temperature of zone) TAIR 4 ->Input to be printed-20
12,5 ! Type56b: 5- (air temperature of zone) TAIR 5 ->Input to be printed-21
12,6 ! Type56b: 6- (air temperature of zone) TAIR 6 ->Input to be printed-22
12,7 ! Type56b: 7- (air temperature of zone) TAIR 7 ->Input to be printed-23
12,8 ! Type56b: 8- (air temperature of zone) TAIR 8 ->Input to be printed-24
58,1 ! Données météo (9a):Output 1 ->Input to be printed-25
FermStBur ! gestion Store:FermStBur ->Input to be printed-26
FermStAngA ! gestion Store:FermStAngA ->Input to be printed-27
FermStAngB ! gestion Store:FermStAngB ->Input to be printed-28
FermStToi ! gestion Store:FermStToi ->Input to be printed-29
FermStSal ! gestion Store:FermStSal ->Input to be printed-30
FermStChb ! gestion Store:FermStChb ->Input to be printed-31
FermStSymA ! gestion Store:FermStSymA ->Input to be printed-32
FermStSymC ! gestion Store:FermStSymC ->Input to be printed-33
FermStKft ! gestion Store:FermStKft ->Input to be printed-34
FermStAsyA ! gestion Store:FermStAsyA ->Input to be printed-35
FermStAsyC ! gestion Store:FermStAsyC ->Input to be printed-36
0,0 ! [unconnected] Input to be printed-37
0,0 ! [unconnected] Input to be printed-38
0,0 ! [unconnected] Input to be printed-39
0,0 ! [unconnected] Input to be printed-40
0,0 ! [unconnected] Input to be printed-41
0,0 ! [unconnected] Input to be printed-42
0,0 ! [unconnected] Input to be printed-43
0,0 ! [unconnected] Input to be printed-44
12,33 ! Type56b: 33- (operative room temperatu...) TOP 1 ->Input to be printed-45
12,34 ! Type56b: 34- (operative room temperatu...) TOP 2 ->Input to be printed-46
12,35 ! Type56b: 35- (operative room temperatu...) TOP 3 ->Input to be printed-47
12,36 ! Type56b: 36- (operative room temperatu...) TOP 4 ->Input to be printed-48
12,37 ! Type56b: 37- (operative room temperatu...) TOP 5 ->Input to be printed-49
12,38 ! Type56b: 38- (operative room temperatu...) TOP 6 ->Input to be printed-50
12,39 ! Type56b: 39- (operative room temperatu...) TOP 7 ->Input to be printed-51
12,40 ! Type56b: 40- (operative room temperatu...) TOP 8 ->Input to be printed-52
0,0 ! [unconnected] Input to be printed-53
0,0 ! [unconnected] Input to be printed-54
0,0 ! [unconnected] Input to be printed-55
0,0 ! [unconnected] Input to be printed-56
0,0 ! [unconnected] Input to be printed-57
0,0 ! [unconnected] Input to be printed-58
0,0 ! [unconnected] Input to be printed-59
0,0 ! [unconnected] Input to be printed-60
PeclBur ! Puissance Eclairage:PeclBur ->Input to be printed-61
PeclAng ! Puissance Eclairage:PeclAng ->Input to be printed-62
PeclToi ! Puissance Eclairage:PeclToi ->Input to be printed-63
PeclSal ! Puissance Eclairage:PeclSal ->Input to be printed-64
PeclChb ! Puissance Eclairage:PeclChb ->Input to be printed-65
PeclSym ! Puissance Eclairage:PeclSym ->Input to be printed-66
PeclKft ! Puissance Eclairage:PeclKft ->Input to be printed-67
PeclAsy ! Puissance Eclairage:PeclAsy ->Input to be printed-68
12,9 ! Type56b: 9- (relativ humidity of zone...) RELHUM 1 ->Input to be printed-69
12,10 ! Type56b: 10- (relativ humidity of zone...) RELHUM 2 ->Input to be printed-70
12,11 ! Type56b: 11- (relativ humidity of zone...) RELHUM 3 ->Input to be printed-71
12,12 ! Type56b: 12- (relativ humidity of zone...) RELHUM 4 ->Input to be printed-72
12,13 ! Type56b: 13- (relativ humidity of zone...) RELHUM 5 ->Input to be printed-73
12,14 ! Type56b: 14- (relativ humidity of zone...) RELHUM 6 ->Input to be printed-74
12,15 ! Type56b: 15- (relativ humidity of zone...) RELHUM 7 ->Input to be printed-75
12,16 ! Type56b: 16- (relativ humidity of zone...) RELHUM 8 ->Input to be printed-76
*** INITIAL INPUT VALUES
QheatBur QheatAng QheatToi QheatSal QheatChb QheatSym QheatKft QheatAsy
QfrBur QfrAng QfrToi QfrSal QfrChb QfrSym QfrKft QfrAsy Tintbur TintAng
TintToi TintSal TintChb TintSym TintKft TintAsy Text FermStoBur FermStoAngA
FermStoAngB FermStoToi FermStoSal FermStoChb FermStoSymA FermStoSymC
FermStoKft FermStoAsyA FermStoAsyC ONnatBur ONnatAng ONnatToi ONnatSal
ONnatChb ONnatSym ONnatKft ONnatAsy ToperBur ToperAng ToperToi ToperSal
ToperChb ToperSym ToperKft ToperAsy ACHuniBur ACHuniAng ACHuniToi ACHuniSal
ACHuniChb ACHuniSym ACHuniKft ACHuniASY puisLUXbur puisLUXang puisLUXtoi
puisLUXsal puisLUXchb puisLUXsym puisLUXkft puisLUXasy relhumBur relhumAng
relhumToi relhumSal relhumChb relhumSym relhumKft relhumAsy
*** External files
ASSIGN "resultatsfinal" 38
*|? Output File for printed results |1000
*------------------------------------------------------------------------------
* Model "HumRelPulsSym" (Type 33)
*
UNIT 48 TYPE 33 HumRelPulsSym
*$UNIT_NAME HumRelPulsSym
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 690 445
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsSym ! Puls San Meca:TpulsSym ->Dry bulb temp.
HabsPulsSym ! Puls San Meca:HabsPulsSym ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsChb" (Type 33)
*
UNIT 49 TYPE 33 HumRelPulsChb
*$UNIT_NAME HumRelPulsChb
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 669 434
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsChb ! Puls San Meca:TpulsChb ->Dry bulb temp.
HabsPulsChb ! Puls San Meca:HabsPulsChb ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsSal" (Type 33)
*
UNIT 50 TYPE 33 HumRelPulsSal
*$UNIT_NAME HumRelPulsSal
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 655 445
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsSal ! Puls San Meca:TpulsSal ->Dry bulb temp.
HabsPulsSal ! Puls San Meca:HabsPulsSal ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsAng" (Type 33)
*
UNIT 51 TYPE 33 HumRelPulsAng
*$UNIT_NAME HumRelPulsAng
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 606 445
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsAng ! Puls San Meca:TpulsAng ->Dry bulb temp.
HabsPulsAng ! Puls San Meca:HabsPulsAng ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsKft" (Type 33)
*
UNIT 52 TYPE 33 HumRelPulsKft
*$UNIT_NAME HumRelPulsKft
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 708 434
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsKft ! Puls San Meca:TpulsKft ->Dry bulb temp.
HabsPulsKft ! Puls San Meca:HabsPulsKft ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsAsy" (Type 33)
*
UNIT 53 TYPE 33 HumRelPulsAsy
*$UNIT_NAME HumRelPulsAsy
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 743 445
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsAsy ! Puls San Meca:TpulsAsy ->Dry bulb temp.
HabsPulsAsy ! Puls San Meca:HabsPulsAsy ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "HumRelPulsToi" (Type 33)
*
UNIT 54 TYPE 33 HumRelPulsToi
*$UNIT_NAME HumRelPulsToi
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Humidity Ratio Known\Type33c.tmf
*$POSITION 635 434
*$LAYER Main #
PARAMETERS 3
4 ! 1 Psychrometrics mode
0 ! 2 Wet bulb mode
2 ! 3 Error mode
INPUTS 3
TpulsToi ! Puls San Meca:TpulsToi ->Dry bulb temp.
HabsPulsToi ! Puls San Meca:HabsPulsToi ->Absolute humidity ratio
0,0 ! [unconnected] Pressure
*** INITIAL INPUT VALUES
7 0.005 1
*------------------------------------------------------------------------------
* Model "occup Bur Pay" (Type 14)
*
UNIT 55 TYPE 14 occup Bur Pay
*$UNIT_NAME occup Bur Pay
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 524 971
*$LAYER Main #
PARAMETERS 12
0 ! 1 Initial value of time
0 ! 2 Initial value of function
8 ! 3 Time at point-1
0 ! 4 Value at point -1
9 ! 5 Time at point-2
1 ! 6 Value at point -2
18 ! 7 Time at point-3
1 ! 8 Value at point -3
19 ! 9 Time at point-4
0 ! 10 Value at point -4
24 ! 11 Time at point-5
0 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "occup Sal" (Type 14)
*
UNIT 56 TYPE 14 occup Sal
*$UNIT_NAME occup Sal
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 693 971
*$LAYER Main #
PARAMETERS 18
0 ! 1 Initial value of time
0 ! 2 Initial value of function
8 ! 3 Time at point-1
0 ! 4 Value at point -1
9 ! 5 Time at point-2
1 ! 6 Value at point -2
13 ! 7 Time at point-3
1 ! 8 Value at point -3
14 ! 9 Time at point-4
0 ! 10 Value at point -4
15 ! 11 Time at point-5
1 ! 12 Value at point -5
16 ! 13 Time at point-6
1 ! 14 Value at point -6
17 ! 15 Time at point-7
0 ! 16 Value at point -7
24 ! 17 Time at point-8
0 ! 18 Value at point -8
*------------------------------------------------------------------------------
* Model "Cons saison froid" (Type 14)
*
UNIT 57 TYPE 14 Cons saison froid
*$UNIT_NAME Cons saison froid
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 320 32
*$LAYER Main #
PARAMETERS 12
4344 ! 1 Initial value of time
25 ! 2 Initial value of function
7296 ! 3 Time at point-1
25 ! 4 Value at point -1
7297 ! 5 Time at point-2
24 ! 6 Value at point -2
12384 ! 7 Time at point-3
24 ! 8 Value at point -3
12385 ! 9 Time at point-4
25 ! 10 Value at point -4
13848 ! 11 Time at point-5
25 ! 12 Value at point -5
*------------------------------------------------------------------------------
* Model "Données météo (9a)" (Type 9)
*
UNIT 58 TYPE 9 Données météo (9a)
*$UNIT_NAME Données météo (9a)
*$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf
*$POSITION 123 309
*$LAYER Main #
PARAMETERS 30
3 ! 1 Mode
4344 ! 2 Header Lines to Skip
6 ! 3 No. of values to read
1 ! 4 Time interval of data
-1 ! 5 Interpolate or not-1
1 ! 6 Multiplication factor-1
0 ! 7 Addition factor-1
0 ! 8 Average or instantaneous value-1
-1 ! 9 Interpolate or not-2
3.6 ! 10 Multiplication factor-2
0 ! 11 Addition factor-2
0 ! 12 Average or instantaneous value-2
-1 ! 13 Interpolate or not-3
3.6 ! 14 Multiplication factor-3
0 ! 15 Addition factor-3
0 ! 16 Average or instantaneous value-3
-1 ! 17 Interpolate or not-4
1 ! 18 Multiplication factor-4
0 ! 19 Addition factor-4
0 ! 20 Average or instantaneous value-4
-1 ! 21 Interpolate or not-5
1 ! 22 Multiplication factor-5
0 ! 23 Addition factor-5
0 ! 24 Average or instantaneous value-5
-1 ! 25 Interpolate or not-6
1 ! 26 Multiplication factor-6
0 ! 27 Addition factor-6
0 ! 28 Average or instantaneous value-6
39 ! 29 Logical unit for input file
-1 ! 30 Free format mode
*** External files
ASSIGN "D:\Program Files\Trnsys16\Weather\24mois.dat" 39
*|? Input file name |1000
*------------------------------------------------------------------------------
END
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.00.0036
Simulation log for: "C:\simulations\IBGE\deck\Syst01SanMecaTotFroid.TPF"
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Simulation stopped with errors
Total Notices : 0
Total Warnings : 0
Total Fatal Errors : 8
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.00.0036
Listing file for: "C:\simulations\IBGE\deck\Syst01SanMecaTotFroid.TPF"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 23 : The EQUATION processor in TRNSYS has reported an error while trying to evaluate the listed equation or constant and cannot proceed. Please check the formulation carefully, fix the error and re-run the simulation
Reported information : Error 23
*********************************************************************************************************************************************************************************************************
* TRNBuild 1.0.76
*********************************************************************************************************************************************************************************************************
* BUILDING DESCRIPTIONS FILE TRNSYS
* FOR BUILDING: E:\IBGEsimuls\Trnbuild\Isol1Inert1Surfv1Slab0.bui
* GET BY WORKING WITH TRNBuild 1.0 for Windows
*********************************************************************************************************************************************************************************************************
*
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* C o m m e n t s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* P r o j e c t
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*+++ PROJECT
*+++ TITLE=ISO1INERT1SURFV1SYST0
*+++ DESCRIPTION=BUREAUX ISOLE AVEC FORTE INERTIE ET 40PC VITRAGE SANS SLAB
*+++ CREATED=UNDEFINED
*+++ ADDRESS=UNDEFINED
*+++ CITY=UNDEFINED
*+++ SWITCH=UNDEFINED
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* P r o p e r t i e s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PROPERTIES
DENSITY=1.204 : CAPACITY=1.012 : HVAPOR=2454.0 : SIGMA=2.041e-007 : RTEMP=293.15
*--- alpha calculation -------------------
KFLOORUP=7.2 : EFLOORUP=0.31 : KFLOORDOWN=3.888 : EFLOORDOWN=0.31
KCEILUP=7.2 : ECEILUP=0.31 : KCEILDOWN=3.888 : ECEILDOWN=0.31
KVERTICAL=5.76 : EVERTICAL=0.3
*
*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TYPES
*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* L a y e r s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LAYER PLATRPLAQ
CONDUCTIVITY= 1.26 : CAPACITY= 1 : DENSITY= 900
LAYER PLATRE
CONDUCTIVITY= 1.872 : CAPACITY= 1 : DENSITY= 1300
LAYER PARPING_DE
CONDUCTIVITY= 3.791 : CAPACITY= 0.65 : DENSITY= 1300
LAYER LAINEROCHE
CONDUCTIVITY= 0.18 : CAPACITY= 0.92 : DENSITY= 80
LAYER PERPENDICU
RESISTANCE= 0.047
LAYER BRIQ_CR
CONDUCTIVITY= 1.697 : CAPACITY= 0.794 : DENSITY= 720
LAYER BOIS_LOURD
CONDUCTIVITY= 0.83 : CAPACITY= 2.4 : DENSITY= 650
LAYER BETON
CONDUCTIVITY= 6.318 : CAPACITY= 0.92 : DENSITY= 2300
LAYER LINOLEUM
CONDUCTIVITY= 0.61 : CAPACITY= 1 : DENSITY= 1000
LAYER PANBOIS
CONDUCTIVITY= 0.47 : CAPACITY= 2 : DENSITY= 600
LAYER HORIZONTAL
RESISTANCE= 0.047
LAYER AIR12
RESISTANCE= 0.047
LAYER AIR45
RESISTANCE= 0.047
LAYER BITUME
CONDUCTIVITY= 0.61 : CAPACITY= 1 : DENSITY= 1200
LAYER VIDE
RESISTANCE= 1e-005
LAYER CARRELAGE
CONDUCTIVITY= 6.137 : CAPACITY= 0.7 : DENSITY= 2300
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I n p u t s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INPUTS TSOL SHDBUR ACHNATBUR ACHSANBUR ACHNATCHB ACHSANCHB ACHNATSAL ACHSANSAL ACHSANPAY ACHNATKFT ACHSANKFT GNPCBUR GNLTBUR GNHMBUR GNHMHMBUR GNPCSAL GNLTSAL GNHMSAL GNHMHMSAL GNPCPAY GNLTSYM ;
GNLTASY GNHMPAY GNHMHMPAY GNPCCHB GNLTCHB GNHMCHB GNHMHMCHB GNPCKFT GNLTKFT GNHMKFT GNHMHMKFT NUMFEN GNLTANG SHDSALA SHDCHB SHDKFT CSGFRDBUR PFRBUR PFRASY PFRSYM CSGFRDSAL PFRSAL CSGFRDCHB PFRCHB ;
PFRANG PFRKFT CSGCHABUR CSGCHASAL CSGCHACHB PFRTOI SHDANGA SHDANGB SHDTOI SHDSYMA SHDSYMC SHDASYA SHDASYC GNLTTOI HMSANANG HMSANASY HMSANBUR HMSANCHB HMSANKFT HMSANSAL HSANSYM HMSANTOI TPULSSANBUR ;
TPULSSANANG TPULSSANTOI TPULSSANSAL TPULSSANCHB TPULSSANSYM TPULSSANKFT TPULSSANASY ACHNATANG ACHNATTOI ACHNATSYM VENNATASY
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* S c h e d u l e s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SCHEDULE JNO
HOURS =0.0 24.0
VALUES=0 0
SCHEDULE JOCIRCUL
HOURS =0.0 7.0 19.0 24.0
VALUES=0 1. 0 0
SCHEDULE JOPERSBUR
HOURS =0.0 8.0 9.0 12.50 13.50 17.0 18.0 24.0
VALUES=0 0.5 1. 0.5 1. 0.5 0 0
SCHEDULE JOEQUIPBUR
HOURS =0.0 8.0 18.0 24.0
VALUES=0 1. 0 0
SCHEDULE JOPERSSAL
HOURS =0.0 8.50 10.0 10.50 12.50 13.50 16.0 24.0
VALUES=0 1. 0 1. 0 1. 0 0
SCHEDULE JOEQUIPSAL
HOURS =0.0 8.50 16.0 24.0
VALUES=0 1. 0 0
SCHEDULE JOPERSKFT
HOURS =0.0 8.0 9.0 12.0 14.0 18.0 24.0
VALUES=0 0.4 0.05 1. 0.05 0 0
SCHEDULE JOEQUIPKFT
HOURS =0.0 8.0 9.0 12.0 14.0 24.0
VALUES=0 1. 0 1. 0 0
SCHEDULE SOCIRCUL
DAYS=1 2 3 4 5 6 7
HOURLY=JOCIRCUL JOCIRCUL JOCIRCUL JOCIRCUL JOCIRCUL JNO JNO
SCHEDULE SOPERSBUR
DAYS=1 2 3 4 5 6 7
HOURLY=JOPERSBUR JOPERSBUR JOPERSBUR JOPERSBUR JOPERSBUR JNO JNO
SCHEDULE SOEQUIPBUR
DAYS=1 2 3 4 5 6 7
HOURLY=JOEQUIPBUR JOEQUIPBUR JOEQUIPBUR JOEQUIPBUR JOEQUIPBUR JNO JNO
SCHEDULE SOPERSSAL
DAYS=1 2 3 4 5 6 7
HOURLY=JOPERSSAL JOPERSSAL JOPERSSAL JOPERSSAL JOPERSSAL JNO JNO
SCHEDULE SOEQUIPSAL
DAYS=1 2 3 4 5 6 7
HOURLY=JOEQUIPSAL JOEQUIPSAL JOEQUIPSAL JOEQUIPSAL JOEQUIPSAL JNO JNO
SCHEDULE SOPERSKFT
DAYS=1 2 3 4 5 6 7
HOURLY=JOPERSKFT JOPERSKFT JOPERSKFT JOPERSKFT JOPERSKFT JNO JNO
SCHEDULE SOEQUIPKFT
DAYS=1 2 3 4 5 6 7
HOURLY=JOEQUIPKFT JOEQUIPKFT JOEQUIPKFT JOEQUIPKFT JOEQUIPKFT JNO JNO
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* W a l l s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WALL MUREXT
LAYERS = PLATRE PARPING_DE LAINEROCHE PERPENDICU BRIQ_CR
THICKNESS= 0.01 0.19 0.08 0 0.07
ABS-FRONT= 0.35 : ABS-BACK= 0.7
HFRONT = 11 : HBACK= 64
WALL DALREZCAV
LAYERS = CARRELAGE BETON LAINEROCHE
THICKNESS= 0.008 0.25 0.04
ABS-FRONT= 0.6 : ABS-BACK= 0.6
HFRONT = 11 : HBACK= 11
WALL PLANCHER
LAYERS = CARRELAGE BETON PLATRE
THICKNESS= 0.008 0.25 0.02
ABS-FRONT= 0.6 : ABS-BACK= 0.35
HFRONT = 11 : HBACK= 64
WALL CLOISON
LAYERS = PLATRPLAQ LAINEROCHE PLATRPLAQ
THICKNESS= 0.01 0.04 0.01
ABS-FRONT= 0.35 : ABS-BACK= 0.35
HFRONT = 11 : HBACK= 11
WALL TOITURE
LAYERS = PLATRE BETON LAINEROCHE BITUME
THICKNESS= 0.02 0.27 0.12 0.01
ABS-FRONT= 0.35 : ABS-BACK= 0.7
HFRONT = 11 : HBACK= 64
WALL VIDE
LAYERS = VIDE
THICKNESS= 0
ABS-FRONT= 0.6 : ABS-BACK= 0.6
HFRONT = 11 : HBACK= 11
WALL MURINT
LAYERS = PLATRPLAQ PARPING_DE PLATRPLAQ
THICKNESS= 0.01 0.19 0.01
ABS-FRONT= 0.35 : ABS-BACK= 0.35
HFRONT = 11 : HBACK= 11
WALL PLAFOND
LAYERS = PLATRE BETON CARRELAGE
THICKNESS= 0.02 0.25 0.008
ABS-FRONT= 0.6 : ABS-BACK= 0.35
HFRONT = 11 : HBACK= 64
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* W i n d o w s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOW FENETRE
WINID=INPUT 1*NUMFEN : HINSIDE=11 : HOUTSIDE=64 : SLOPE=90 : SPACID=1 : WWID=0.77 : WHEIG=1.08 : FFRAME=0.18 : UFRAME=9 : ABSFRAME=0.6 : RISHADE=0 : RESHADE=0 : REFLISHADE=0.5 : REFLOSHADE=0.5 : ;
CCISHADE=0.5
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* D e f a u l t G a i n s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* O t h e r G a i n s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GAIN GNHMBUR
CONVECTIVE=INPUT 0.5*GNHMBUR : RADIATIVE=INPUT 0.5*GNHMBUR : HUMIDITY=INPUT 1*GNHMHMBUR
GAIN GNPCBUR
CONVECTIVE=INPUT 0.5*GNPCBUR : RADIATIVE=INPUT 0.5*GNPCBUR : HUMIDITY=0
GAIN GNLTBUR
CONVECTIVE=INPUT 0.66*GNLTBUR : RADIATIVE=INPUT 0.33*GNLTBUR : HUMIDITY=0
GAIN GNLTANG
CONVECTIVE=INPUT 0.66*GNLTANG : RADIATIVE=INPUT 0.33*GNLTANG : HUMIDITY=0
GAIN GNHMSAL
CONVECTIVE=INPUT 0.5*GNHMSAL : RADIATIVE=INPUT 0.5*GNHMSAL : HUMIDITY=INPUT 1*GNHMHMSAL
GAIN GNPCSAL
CONVECTIVE=INPUT 0.5*GNPCSAL : RADIATIVE=INPUT 0.5*GNPCSAL : HUMIDITY=0
GAIN GNLTSAL
CONVECTIVE=INPUT 0.66*GNLTSAL : RADIATIVE=INPUT 0.33*GNLTSAL : HUMIDITY=0
GAIN GNHMPAY
CONVECTIVE=INPUT 0.5*GNHMPAY : RADIATIVE=INPUT 0.5*GNHMPAY : HUMIDITY=INPUT 1*GNHMHMPAY
GAIN GNPCPAY
CONVECTIVE=INPUT 0.5*GNPCPAY : RADIATIVE=INPUT 0.5*GNPCPAY : HUMIDITY=0
GAIN GNLTSYM
CONVECTIVE=INPUT 0.66*GNLTSYM : RADIATIVE=INPUT 0.33*GNLTSYM : HUMIDITY=0
GAIN GNLTASY
CONVECTIVE=INPUT 0.66*GNLTASY : RADIATIVE=INPUT 0.33*GNLTASY : HUMIDITY=0
GAIN GNHMCHB
CONVECTIVE=INPUT 0.5*GNHMCHB : RADIATIVE=INPUT 0.5*GNHMCHB : HUMIDITY=INPUT 1*GNHMHMCHB
GAIN GNPCCHB
CONVECTIVE=INPUT 0.5*GNPCCHB : RADIATIVE=INPUT 0.5*GNPCCHB : HUMIDITY=0
GAIN GNLTCHB
CONVECTIVE=INPUT 0.66*GNLTCHB : RADIATIVE=INPUT 0.33*GNLTCHB : HUMIDITY=0
GAIN GNHMKFT
CONVECTIVE=INPUT 0.5*GNHMKFT : RADIATIVE=INPUT 0.5*GNHMKFT : HUMIDITY=INPUT 1*GNHMHMKFT
GAIN GNPCKFT
CONVECTIVE=INPUT 0.5*GNPCKFT : RADIATIVE=INPUT 0.5*GNPCKFT : HUMIDITY=0
GAIN GNLTKFT
CONVECTIVE=INPUT 0.66*GNLTKFT : RADIATIVE=INPUT 0.33*GNLTKFT : HUMIDITY=0
GAIN GNLTTOI
CONVECTIVE=INPUT 0.66*GNLTTOI : RADIATIVE=INPUT 0.33*GNLTTOI : HUMIDITY=0
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* C o m f o r t
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I n f i l t r a t i o n
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INFILTRATION INF
AIRCHANGE=0.2
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* V e n t i l a t i o n
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
VENTILATION VENNATBUR
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATBUR
HUMIDITY=OUTSIDE
VENTILATION AIRSANBUR
TEMPERATURE=INPUT 1*TPULSSANBUR
AIRCHANGE=INPUT 1*ACHSANBUR
HUMIDITY=INPUT 1*HMSANBUR
VENTILATION VENNATCHB
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATCHB
HUMIDITY=OUTSIDE
VENTILATION AIRSANCHB
TEMPERATURE=INPUT 1*TPULSSANCHB
AIRCHANGE=INPUT 1*ACHSANCHB
HUMIDITY=INPUT 1*HMSANCHB
VENTILATION VENNATSAL
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATSAL
HUMIDITY=OUTSIDE
VENTILATION AIRSANSAL
TEMPERATURE=INPUT 1*TPULSSANSAL
AIRCHANGE=INPUT 1*ACHSANSAL
HUMIDITY=INPUT 1*HMSANSAL
VENTILATION VENNATSYM
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATSYM
HUMIDITY=OUTSIDE
VENTILATION AIRSANSYM
TEMPERATURE=INPUT 1*TPULSSANSYM
AIRCHANGE=INPUT 1*ACHSANPAY
HUMIDITY=INPUT 1*HSANSYM
VENTILATION VENNATKFT
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATKFT
HUMIDITY=OUTSIDE
VENTILATION AIRSANKFT
TEMPERATURE=INPUT 1*TPULSSANKFT
AIRCHANGE=INPUT 1*ACHSANKFT
HUMIDITY=INPUT 1*HMSANKFT
VENTILATION AIRSANANG
TEMPERATURE=INPUT 1*TPULSSANANG
AIRCHANGE=INPUT 1*ACHSANBUR
HUMIDITY=INPUT 1*HMSANANG
VENTILATION AIRSANTOI
TEMPERATURE=INPUT 1*TPULSSANTOI
AIRCHANGE=INPUT 1*ACHSANBUR
HUMIDITY=INPUT 1*HMSANTOI
VENTILATION AIRSANASY
TEMPERATURE=INPUT 1*TPULSSANASY
AIRCHANGE=INPUT 1*ACHSANPAY
HUMIDITY=INPUT 1*HMSANASY
VENTILATION VENNATANG
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATANG
HUMIDITY=OUTSIDE
VENTILATION VENNATTOI
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*ACHNATTOI
HUMIDITY=OUTSIDE
VENTILATION VENNATASY
TEMPERATURE=OUTSIDE
AIRCHANGE=INPUT 1*VENNATASY
HUMIDITY=OUTSIDE
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* C o o l i n g
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COOLING FROIDBUR
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRBUR
HUMIDITY=100
COOLING FROIDASY
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRASY
HUMIDITY=100
COOLING FROIDSYM
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRSYM
HUMIDITY=100
COOLING FROIDSAL
ON=INPUT 1*CSGFRDSAL
POWER=INPUT 1*PFRSAL
HUMIDITY=100
COOLING FROIDCHB
ON=INPUT 1*CSGFRDCHB
POWER=INPUT 1*PFRCHB
HUMIDITY=100
COOLING FROIDANG
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRANG
HUMIDITY=100
COOLING FROIDKFT
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRKFT
HUMIDITY=100
COOLING FROIDTOI
ON=INPUT 1*CSGFRDBUR
POWER=INPUT 1*PFRTOI
HUMIDITY=100
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* H e a t i n g
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HEATING HEATCHB
ON=INPUT 1*CSGCHACHB
POWER=999999999
HUMIDITY=0
RRAD=0
HEATING HEATCOU
ON=15
POWER=999999999
HUMIDITY=0
RRAD=0
HEATING HEATBUR
ON=INPUT 1*CSGCHABUR
POWER=999999999
HUMIDITY=0
RRAD=0
HEATING HEATSAL
ON=INPUT 1*CSGCHASAL
POWER=999999999
HUMIDITY=0
RRAD=0
*
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONES BUR BURANG BURTOI SAL CHB SYM KFET ASY
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* O r i e n t a t i o n s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORIENTATIONS HORIZONTAL AAA BBB CCC DDD
*
*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BUILDING
*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e BUR / A i r n o d e BUR
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE BUR
AIRNODE BUR
WALL =CLOISON : SURF= 21 : AREA= 38.88 : BOUNDARY=IDENTICAL
WALL =PLAFOND : SURF= 46 : AREA= 19.44 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF= 50 : AREA= 5.76 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=106 : AREA= 3.96 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDBUR
WALL =PLANCHER : SURF=239 : AREA= 19.44 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMBUR : SCALE= SCHEDULE 13.608*SOPERSBUR
GAIN = GNPCBUR : SCALE= SCHEDULE 13.608*SOEQUIPBUR
GAIN = GNLTBUR : SCALE= SCHEDULE 13.608*SOEQUIPBUR
INFILTRATION= INF
VENTILATION = VENNATBUR
VENTILATION = AIRSANBUR
COOLING = FROIDBUR
HEATING = HEATBUR
CAPACITANCE = 314.928 : VOLUME= 52.488 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e BURANG / A i r n o d e BURANG
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE BURANG
AIRNODE BURANG
WALL =PLAFOND : SURF= 5 : AREA= 19.08 : BOUNDARY=IDENTICAL
WALL =CLOISON : SURF= 23 : AREA= 24.3 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF= 53 : AREA= 5.76 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=123 : AREA= 3.96 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDANGA
WALL =MUREXT : SURF= 54 : AREA= 8.64 : EXTERNAL : ORI=BBB : FSKY=0.5
WINDOW=FENETRE : SURF=201 : AREA= 5.94 : EXTERNAL : ORI=BBB : FSKY=0.5 : ESHADE=INPUT 1*SHDANGB
WALL =PLANCHER : SURF=241 : AREA= 19.44 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMBUR : SCALE= SCHEDULE 13.608*SOPERSBUR
GAIN = GNPCBUR : SCALE= SCHEDULE 13.608*SOEQUIPBUR
GAIN = GNLTANG : SCALE= SCHEDULE 13.608*SOEQUIPBUR
INFILTRATION= INF
VENTILATION = VENNATBUR
VENTILATION = AIRSANBUR
COOLING = FROIDANG
HEATING = HEATBUR
CAPACITANCE = 62.99 : VOLUME= 52.488 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e BURTOI / A i r n o d e BURTOI
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE BURTOI
AIRNODE BURTOI
WALL =CLOISON : SURF= 7 : AREA= 38.88 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF= 57 : AREA= 5.76 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=124 : AREA= 3.96 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDTOI
WALL =TOITURE : SURF= 58 : AREA= 19.44 : EXTERNAL : ORI=HORIZONTAL : FSKY=1
WALL =PLANCHER : SURF= 1 : AREA= 19.44 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMBUR : SCALE= SCHEDULE 13.608*SOPERSBUR
GAIN = GNPCBUR : SCALE= SCHEDULE 13.608*SOEQUIPBUR
GAIN = GNLTTOI : SCALE= SCHEDULE 13.608*SOEQUIPBUR
INFILTRATION= INF
VENTILATION = VENNATBUR
VENTILATION = AIRSANBUR
COOLING = FROIDTOI
HEATING = HEATBUR
CAPACITANCE = 314.928 : VOLUME= 52.488 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e SAL / A i r n o d e SAL
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE SAL
AIRNODE SAL
WALL =CLOISON : SURF= 98 : AREA= 64.8 : BOUNDARY=IDENTICAL
WALL =PLAFOND : SURF=170 : AREA= 58.32 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF=186 : AREA= 20.52 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=144 : AREA= 11.88 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDSALA
WALL =PLANCHER : SURF= 34 : AREA= 58.32 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMSAL : SCALE= SCHEDULE 58.32*SOPERSSAL
GAIN = GNPCSAL : SCALE= SCHEDULE 58.32*SOPERSSAL
GAIN = GNLTSAL : SCALE= SCHEDULE 58.32*SOPERSSAL
INFILTRATION= INF
VENTILATION = VENNATSAL
VENTILATION = AIRSANSAL
COOLING = FROIDSAL
HEATING = HEATSAL
CAPACITANCE = 349.92 : VOLUME= 58.32 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e CHB / A i r n o d e CHB
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE CHB
AIRNODE CHB
WALL =CLOISON : SURF=108 : AREA= 48.6 : BOUNDARY=IDENTICAL
WALL =PLAFOND : SURF=190 : AREA= 25.92 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF=219 : AREA= 5.76 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=150 : AREA= 3.96 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDCHB
WALL =PLANCHER : SURF= 40 : AREA= 25.92 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMCHB : SCALE= 23.328
GAIN = GNPCCHB : SCALE= 23.328
GAIN = GNLTCHB : SCALE= 23.328
INFILTRATION= INF
VENTILATION = VENNATCHB
VENTILATION = AIRSANCHB
COOLING = FROIDCHB
HEATING = HEATCHB
CAPACITANCE = 419.904 : VOLUME= 69.984 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e SYM / A i r n o d e SYM
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE SYM
AIRNODE SYM
WALL =CLOISON : SURF= 76 : AREA= 79.2 : BOUNDARY=IDENTICAL
WALL =PLANCHER : SURF=224 : AREA= 142.56 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF=226 : AREA= 20.52 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=168 : AREA= 11.88 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDSYMA
WALL =MUREXT : SURF=227 : AREA= 20.52 : EXTERNAL : ORI=CCC : FSKY=0.5
WINDOW=FENETRE : SURF=173 : AREA= 11.88 : EXTERNAL : ORI=CCC : FSKY=0.5 : ESHADE=INPUT 1*SHDSYMC
WALL =PLAFOND : SURF=181 : AREA= 142.56 : BOUNDARY=IDENTICAL
REGIME
GAIN = GNHMPAY : SCALE= SCHEDULE 99.792*SOPERSBUR
GAIN = GNPCPAY : SCALE= SCHEDULE 99.792*SOEQUIPBUR
GAIN = GNLTSYM : SCALE= SCHEDULE 99.792*SOEQUIPBUR
INFILTRATION= INF
VENTILATION = VENNATSYM
VENTILATION = AIRSANSYM
COOLING = FROIDSYM
HEATING = HEATBUR
CAPACITANCE = 2566.08 : VOLUME= 427.68 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e KFET / A i r n o d e KFET
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE KFET
AIRNODE KFET
WALL =MURINT : SURF= 82 : AREA= 90 : BOUNDARY=IDENTICAL
WALL =PLAFOND : SURF=229 : AREA= 103.68 : BOUNDARY=IDENTICAL
WALL =DALREZCAV : SURF=232 : AREA= 103.68 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF=234 : AREA= 20.52 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=176 : AREA= 11.88 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDKFT
REGIME
GAIN = GNHMKFT : SCALE= SCHEDULE 103.68*SOPERSKFT
GAIN = GNPCKFT : SCALE= SCHEDULE 103.68*SOEQUIPKFT
GAIN = GNLTKFT : SCALE= SCHEDULE 103.68*SOEQUIPKFT
INFILTRATION= INF
VENTILATION = VENNATKFT
VENTILATION = AIRSANKFT
COOLING = FROIDKFT
HEATING = HEATBUR
CAPACITANCE = 1866.24 : VOLUME= 311.04 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* Z o n e ASY / A i r n o d e ASY
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZONE ASY
AIRNODE ASY
WALL =PLANCHER : SURF= 19 : AREA= 142.56 : BOUNDARY=IDENTICAL
WALL =PLAFOND : SURF=177 : AREA= 142.56 : BOUNDARY=IDENTICAL
WALL =CLOISON : SURF=182 : AREA= 79.2 : BOUNDARY=IDENTICAL
WALL =MUREXT : SURF=195 : AREA= 22.68 : EXTERNAL : ORI=AAA : FSKY=0.5
WINDOW=FENETRE : SURF=196 : AREA= 11.88 : EXTERNAL : ORI=AAA : FSKY=0.5 : ESHADE=INPUT 1*SHDASYA
WALL =MUREXT : SURF=197 : AREA= 16.32 : EXTERNAL : ORI=CCC : FSKY=0.5
WINDOW=FENETRE : SURF=198 : AREA= 18.24 : EXTERNAL : ORI=CCC : FSKY=0.5 : ESHADE=INPUT 1*SHDASYC
REGIME
GAIN = GNLTASY : SCALE= SCHEDULE 99.792*SOEQUIPBUR
GAIN = GNPCPAY : SCALE= SCHEDULE 99.792*SOEQUIPBUR
GAIN = GNHMPAY : SCALE= SCHEDULE 99.792*SOPERSBUR
INFILTRATION= INF
VENTILATION = AIRSANSYM
VENTILATION = VENNATSYM
COOLING = FROIDASY
HEATING = HEATBUR
CAPACITANCE = 2566.08 : VOLUME= 427.68 : TINITIAL= 20 : PHINITIAL= 50 : WCAPR= 1
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* O u t p u t s
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OUTPUTS
TRANSFER : TIMEBASE=1.000
AIRNODES = BUR BURANG BURTOI SAL CHB SYM KFET ASY
NTYPES = 1 : TAIR - air temperature of zone
= 9 : RELHUM - relativ humidity of zone air
= 30 : QHEAT - sensible heating demand of zone (positive values)
= 31 : QCOOL - sensible cooling demand of zone (positive values)
AIRNODES = BUR BURANG BURTOI SAL CHB SYM KFET ASY
NTYPES = 25 : TOP - operative zone temperature
AIRNODES = BUR
NTYPES = 24 : TMSURF - weighted mean surface temperature of zone
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* E n d
*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
END
_EXTENSION_WINPOOL_START_
WINDOW 4.1 TRNSYS 15 Data File : Multi Band Calculation
Unit System : SI
Name : TRNSYS 15 WINDOW LIB
Desc : Triple
Window ID : 3001
Tilt : 90.0
Glazings : 3
Frame : 1 Al no break 10.790
Spacer : 1 Class1 2.330 -0.010 0.138
Total Height: 1219.2 mm
Total Width : 914.4 mm
Glass Height: 1104.9 mm
Glass Width : 800.1 mm
Mullion : None
Gap Thick Cond dCond Vis dVis Dens dDens Pr dPr
1 Air 12.7 0.02410 7.600 1.730 10.000 1.290 -0.0044 0.720 0.00180
2 Air 12.7 0.02410 7.600 1.730 10.000 1.290 -0.0044 0.720 0.00180
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
Angle 0 10 20 30 40 50 60 70 80 90 Hemis
Tsol 0.624 0.623 0.619 0.611 0.593 0.554 0.474 0.327 0.125 0.000 0.512
Abs1 0.084 0.084 0.086 0.089 0.093 0.099 0.107 0.118 0.125 0.000 0.098
Abs2 0.069 0.069 0.070 0.072 0.075 0.078 0.080 0.079 0.068 0.000 0.074
Abs3 0.055 0.056 0.056 0.058 0.059 0.059 0.056 0.047 0.029 0.000 0.054
Abs4 0 0 0 0 0 0 0 0 0 0 0
Abs5 0 0 0 0 0 0 0 0 0 0 0
Abs6 0 0 0 0 0 0 0 0 0 0 0
Rfsol 0.168 0.168 0.168 0.171 0.181 0.211 0.283 0.428 0.653 1.000 0.252
Rbsol 0.168 0.168 0.168 0.171 0.181 0.211 0.283 0.428 0.653 1.000 0.252
Tvis 0.744 0.744 0.743 0.737 0.722 0.683 0.596 0.428 0.190 0.000 0.630
Rfvis 0.202 0.202 0.203 0.207 0.220 0.255 0.340 0.505 0.745 1.000 0.300
Rbvis 0.202 0.202 0.203 0.207 0.220 0.255 0.340 0.505 0.745 1.000 0.300
SHGC 0.700 0.699 0.697 0.690 0.675 0.638 0.558 0.405 0.186 0.000 0.591
SC: 0.78
Layer ID# 1 1 1 0 0 0
Tir 0.000 0.000 0.000 0 0 0
Emis F 0.840 0.840 0.840 0 0 0
Emis B 0.840 0.840 0.840 0 0 0
Thickness(mm) 2.5 2.5 2.5 0 0 0
Cond(W/m2-C ) 360.0 360.0 360.0 0 0 0
Spectral File None None None None None None
Overall and Center of Glass Ig U-values (W/m2-C)
Outdoor Temperature -17.8 C 15.6 C 26.7 C 37.8 C
Solar WdSpd hcout hrout hin
(W/m2) (m/s) (W/m2-C)
0 0.00 12.25 3.25 7.68 1.71 1.71 1.83 1.83 1.90 1.90 2.03 2.03
0 6.71 25.47 3.22 7.71 1.80 1.80 1.93 1.93 2.00 2.00 2.14 2.14
783 0.00 12.25 3.38 6.48 1.73 1.73 1.99 1.99 2.09 2.09 2.18 2.18
783 6.71 25.47 3.29 6.88 1.83 1.83 2.08 2.08 2.19 2.19 2.28 2.28
WINDOW 4.1 TRNSYS 15 Data File : Multi Band Calculation
Unit System : SI
Name : TRNSYS 15 WINDOW LIB
Desc : Double
Window ID : 2001
Tilt : 90.0
Glazings : 2
Frame : 1 Al no break 10.790
Spacer : 1 Class1 2.330 -0.010 0.138
Total Height: 1219.2 mm
Total Width : 914.4 mm
Glass Height: 1104.9 mm
Glass Width : 800.1 mm
Mullion : None
Gap Thick Cond dCond Vis dVis Dens dDens Pr dPr
1 Air 12.7 0.02410 7.600 1.730 10.000 1.290 -0.0044 0.720 0.00180
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
Angle 0 10 20 30 40 50 60 70 80 90 Hemis
Tsol 0.727 0.726 0.723 0.716 0.702 0.669 0.599 0.455 0.215 0.000 0.623
Abs1 0.080 0.081 0.082 0.085 0.089 0.094 0.101 0.110 0.117 0.000 0.093
Abs2 0.064 0.065 0.066 0.068 0.070 0.071 0.071 0.065 0.049 0.000 0.067
Abs3 0 0 0 0 0 0 0 0 0 0 0
Abs4 0 0 0 0 0 0 0 0 0 0 0
Abs5 0 0 0 0 0 0 0 0 0 0 0
Abs6 0 0 0 0 0 0 0 0 0 0 0
Rfsol 0.129 0.129 0.129 0.131 0.140 0.166 0.230 0.370 0.619 1.000 0.208
Rbsol 0.129 0.129 0.129 0.131 0.140 0.166 0.230 0.370 0.619 1.000 0.208
Tvis 0.817 0.816 0.815 0.811 0.799 0.768 0.695 0.538 0.273 0.000 0.714
Rfvis 0.148 0.148 0.148 0.151 0.162 0.191 0.262 0.417 0.682 1.000 0.236
Rbvis 0.148 0.148 0.148 0.151 0.162 0.191 0.262 0.417 0.682 1.000 0.236
SHGC 0.777 0.776 0.774 0.769 0.756 0.725 0.656 0.509 0.261 0.000 0.676
SC: 0.86
Layer ID# 1 1 0 0 0 0
Tir 0.000 0.000 0 0 0 0
Emis F 0.840 0.840 0 0 0 0
Emis B 0.840 0.840 0 0 0 0
Thickness(mm) 2.5 2.5 0 0 0 0
Cond(W/m2-C ) 360.0 360.0 0 0 0 0
Spectral File None None None None None None
Overall and Center of Glass Ig U-values (W/m2-C)
Outdoor Temperature -17.8 C 15.6 C 26.7 C 37.8 C
Solar WdSpd hcout hrout hin
(W/m2) (m/s) (W/m2-C)
0 0.00 12.25 3.30 7.89 2.59 2.59 2.67 2.67 2.74 2.74 2.97 2.97
0 6.71 25.47 3.24 7.93 2.80 2.80 2.87 2.87 2.95 2.95 3.21 3.21
783 0.00 12.25 3.38 7.61 2.61 2.61 2.78 2.78 2.96 2.96 3.10 3.10
783 6.71 25.47 3.29 7.72 2.83 2.83 2.95 2.95 3.17 3.17 3.33 3.33
Unit System : SI
Name : TRNSYS 15 WINDOW LIB
Desc : Clair
Window ID : 6001
Window ID : 6001
Glazings : 2
Frame : 1 Al no break 10.790
Spacer : 1 Class1 2.330 -0.010 0.138
Total Height: 1219.2 mm
Total Width : 914.4 mm
Glass Height: 1104.9 mm
Glass Width : 800.1 mm
Mullion : None
Gap Thick Cond dCond Vis dVis Dens dDens Pr dPr
1 Air 12.7 0.02410 7.600 1.730 10.000 1.290 -0.0044 0.720 0.00180
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
Angle 0 10 20 30 40 50 60 70 80 90 Hemis
Tsol 0.727 0.726 0.723 0.716 0.702 0.669 0.599 0.455 0.215 0.000 0.623
Abs1 0.080 0.081 0.082 0.085 0.089 0.094 0.101 0.110 0.117 0.000 0.093
Abs2 0.064 0.065 0.066 0.068 0.070 0.071 0.071 0.065 0.049 0.000 0.067
Abs3 0 0 0 0 0 0 0 0 0 0 0
Abs4 0 0 0 0 0 0 0 0 0 0 0
Abs5 0 0 0 0 0 0 0 0 0 0 0
Abs6 0 0 0 0 0 0 0 0 0 0 0
Rfsol 0.129 0.129 0.129 0.131 0.140 0.166 0.230 0.370 0.619 1.000 0.208
Rbsol 0.129 0.129 0.129 0.131 0.140 0.166 0.230 0.370 0.619 1.000 0.208
Tvis 0.817 0.816 0.815 0.811 0.799 0.768 0.695 0.538 0.273 0.000 0.714
Rfvis 0.148 0.148 0.148 0.151 0.162 0.191 0.262 0.417 0.682 1.000 0.236
Rbvis 0.148 0.148 0.148 0.151 0.162 0.191 0.262 0.417 0.682 1.000 0.236
SHGC 0.777 0.776 0.774 0.769 0.756 0.725 0.656 0.509 0.261 0.000 0.676
SC: 0.86
Layer ID# 1 1 0 0 0 0
Tir 0.000 0.000 0 0 0 0
Emis F 0.840 0.840 0 0 0 0
Emis B 0.840 0.840 0 0 0 0
Thickness(mm) 2.5 2.5 0 0 0 0
Cond(W/m2-C ) 360.0 360.0 0 0 0 0
Spectral File None None None None None None
Overall and Center of Glass Ig U-values (W/m2-C)
Outdoor Temperature -17.8 C 15.6 C 26.7 C 37.8 C
Solar WdSpd hcout hrout hin
(W/m2) (m/s) (W/m2-C)
0 0.00 12.25 3.30 7.89 2.59 2.59 2.67 2.67 2.74 2.74 2.97 2.97
0 6.71 25.47 3.24 7.93 2.80 2.80 2.87 2.87 2.95 2.95 3.21 3.21
783 0.00 12.25 3.38 7.61 2.61 2.61 2.78 2.78 2.96 2.96 3.10 3.10
783 6.71 25.47 3.29 7.72 2.83 2.83 2.95 2.95 3.17 3.17 3.33 3.33
WINDOW 4.1 TRNSYS 15 Data File : Multi Band Calculation
WINDOW 4.1 TRNSYS 15 Data File : Multi Band Calculation
Unit System : SI
Name : TRNSYS 15 WINDOW LIB
Desc : Simple
Window ID : 1001
Tilt : 90.0
Glazings : 1
Frame : 1 Al no break 10.790
Spacer : 1 Class1 2.330 -0.010 0.138
Total Height: 1219.2 mm
Total Width : 914.4 mm
Glass Height: 1104.9 mm
Glass Width : 800.1 mm
Mullion : None
Gap Thick Cond dCond Vis dVis Dens dDens Pr dPr
1 0 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0
Angle 0 10 20 30 40 50 60 70 80 90 Hemis
Tsol 0.850 0.850 0.848 0.844 0.835 0.814 0.766 0.652 0.399 0.000 0.770
Abs1 0.075 0.076 0.077 0.080 0.083 0.087 0.091 0.093 0.092 0.000 0.084
Abs2 0 0 0 0 0 0 0 0 0 0 0
Abs3 0 0 0 0 0 0 0 0 0 0 0
Abs4 0 0 0 0 0 0 0 0 0 0 0
Abs5 0 0 0 0 0 0 0 0 0 0 0
Abs6 0 0 0 0 0 0 0 0 0 0 0
Rfsol 0.075 0.074 0.075 0.076 0.082 0.099 0.144 0.255 0.509 1.000 0.136
Rbsol 0.075 0.074 0.075 0.076 0.082 0.099 0.144 0.255 0.509 1.000 0.136
Tvis 0.901 0.901 0.900 0.897 0.890 0.871 0.824 0.706 0.441 0.000 0.823
Rfvis 0.081 0.081 0.082 0.083 0.090 0.108 0.155 0.271 0.536 1.000 0.146
Rbvis 0.081 0.081 0.082 0.083 0.090 0.108 0.155 0.271 0.536 1.000 0.146
SHGC 0.870 0.870 0.868 0.865 0.857 0.837 0.790 0.677 0.423 0.000 0.792
SC: 0.94
Layer ID# 1 0 0 0 0 0
Tir 0.000 0 0 0 0 0
Emis F 0.840 0 0 0 0 0
Emis B 0.840 0 0 0 0 0
Thickness(mm) 2.5 0 0 0 0 0
Cond(W/m2-C ) 360.0 0 0 0 0 0
Spectral File None None None None None None
Overall and Center of Glass Ig U-values (W/m2-C)
Outdoor Temperature -17.8 C 15.6 C 26.7 C 37.8 C
Solar WdSpd hcout hrout hin
(W/m2) (m/s) (W/m2-C)
0 0.00 12.25 3.43 8.23 5.32 5.32 4.99 4.99 4.98 4.98 5.59 5.59
0 6.71 25.47 3.34 8.30 6.33 6.33 5.79 5.79 5.74 5.74 6.54 6.54
783 0.00 12.25 3.47 8.18 5.30 5.30 4.76 4.76 5.24 5.24 5.70 5.70
783 6.71 25.47 3.37 8.28 6.32 6.32 5.64 5.64 5.96 5.96 6.63 6.63
*** END OF LIBRARY ***
***************************************************************************************************
*WinID Description Design U-Value g-value T-sol Rf-sol T-vis
***************************************************************************************************
3001 Triple 2.5/12.7/2.5/12.7/2.5 2 0.7 0.624 0.168 0.744
2001 Double 2.5/12.7/2.5 2.95 0.777 0.727 0.129 0.817
6001 Clair 2.5/12.7/2.5 2.96 0.777 0.727 0.129 0.817
1001 Simple 2.5 5.74 0.87 0.85 0.075 0.901
_EXTENSION_WINPOOL_END_