[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TRNSYS-users] Problem with TYPE190 (HYDROGEMS wind turbine)



I am using TRNSYS 15 with IISiBat 3 to build a model of a Remote Area Power 
System with two different types of wind turbine. I have previously written 
in about this. Michael Kummert was correct in his reply... I had not given 
the two components unique Logical Unit numbers (thanks Michael!)... Since I 
have corrected this the simulation runs without error. However I now have a 
different problem...

Both wind turbines end up being simulated with the same parameters.

The two components have different external files specified for them. The 
external files have different power vs wind speed relationships defined 
within them. I have tested them individually in a simulation and have 
verified that they are being simulated as desired. But when I put them both 
in the same project together they both take on the parameters from only one 
of the external files. Interestingly, they both take on the parameters from 
the external file of the one that is last in the specified component order!

Regards,
Todd Houstein
Hydrogen & Allied Renewable Technologies (HART) research team
School of Engineering
University of Tasmania
+61 3 6226 2094

-----Original Message-----
From:	Michael Kummert
Sent:	Wednesday, 13 October 2004 3:45
To:	'trnsys-users@engr.wisc.edu'
Subject:	Re: [TRNSYS-users] Problem with TYPE190 (HYDROGEMS wind turbine)

Todd,

> I'm using TRNSYS 15 with IISiBat 3 to build a model of a Remote Area 
Power
> System (RAPS) with two different types of wind turbine (both modeled 
using
> Type 190 from the HYDROGEMS library). The .dck file has no errors, but 
the
> .lst file shows one error...
>
>  ***** ERROR *****        TRNSYS ERROR #  71
>  LOGICAL UNIT FOR ASSIGN STATEMENT HAS BEEN PREVIOUSLY ASSIGNED
>  *|? File with WECS parameters? |1000

It looks like you did not change the logical unit number (par(7)) in
Type 190. All logical unit numbers must be given a unique value.

I hope this helps,

Michael Kummert

--
_________________________________________________________

Michael Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert@engr.wisc.edu

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users