Re: [TRNSYS-users] hot water consumption-IEA Task 26

[Werner Keilholz <werner@cstb.fr>]

Florian Hafner wrote:

> thanks ,
> but if i import the input file,  the pictures of the tanks and the 
> names of the parameters and imputs,etc. disappears.  Everything is 
> then parameter1,...2....3,.....
> Cheers , floh

This is because the import function can not recognize which variant 
(a,b,c,...) of the
storage tank is used. Propably the 'Write IISiBat commands' flag was 
switched OFF
in IISiBat when you made this deck.

To get the icon and variable names back, you can use the Edit/Replace 
function,
but you should check if the configuration after change is correct 
(parameters, inputs,
outputs ...). And make a backup before you try ...

Werner

> David Bradley wrote:
>
> > Florian,
> >   One thing you might try is to open your .tpf project, have IISiBat 
> > write the deck (it doesn't matter if you let it run the simulation 
> > run). Then create a new IISiBat project and select "Import TRNSYS 
> > Input file" and browse until you find the deck that was just created. 
> > I have often found that to avoid the "failed to save" problem.
> > Cheers,
> >   David
> >
> > At 01:42 PM 8/30/2004 +0200, Florian Hafner wrote:
> >
> > > Hi Werner
> > >
> > > Thanks for your help at first.
> > > Up to now i have used the type  14b "Time Dependent Forcing 
> > > Function: Water Draw" for my simulation, and it works. so i think , 
> > > the simulation is.o.k .
> > > Now i have tried to use the DHW load profiles in stead of the type 
> > > 14b. i did  copy my  tpf-file  and try to change  it,and this does 
> > > not work.
> > > so maybe someonoe  has an idea
> > >
> > > thanks flo
> > >
> > >
> > >
> > > Werner Keilholz wrote:
> > >
> > > > Hi Florian,
> > > >
> > > > I wouldn't think this problem is specific to the data reader - it 
> > > > looks like there is
> > > > some problem in your project in the first place.
> > > >
> > > > I suggest to try the usual recovery method (select everything and 
> > > > paste into a new
> > > > project, or re-import the .dck file if you have one).
> > > >
> > > > Werner
> > > >
> > > > Florian Hafner wrote:
> > > >
> > > > > hi,
> > > > >
> > > > > i try to use the DHW load profiles that were used in IEA / SHC 
> > > > > Task 26.
> > > > > cause of this i need a second data reader . the problem is, that 
> > > > > if i use a scond data reader ,...."failured to saved"  game over.....
> > > > >
> > > > > thanks
> > > > > flo
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > TRNSYS-users mailing list
> > > > > TRNSYS-users@engr.wisc.edu
> > > > > https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
> > >
> > > _______________________________________________
> > > TRNSYS-users mailing list
> > > TRNSYS-users@engr.wisc.edu
> > > https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
> >
> >
> >
> > **************************************************************************************** 
> >
> > Thermal Energy System Specialists (TESS), LLC
> > David BRADLEY                           2916 Marketplace Drive - 
> > Suite 104
> > Partner                                        Madison, WI 53719
> > Phone: (608) 274-2577 USA
> > Fax: (608) 278-1475
> > E-mail: bradley@tess-inc.com
> > Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com
> >
> > "Providing software solutions for today's energy engineering projects"
> > **************************************************************************************** 
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users


--


 /    \____ Werner Keilholz, Software Development Group Leader
 \____/     CSTB Sophia Antipolis, SAIL
 /    \____ s-mail: BP 209, 06904 SOPHIA ANTIPOLIS,  F R A N C E
 \____/     phone: +33 (0)4 93 95 67 00 -- fax: +33 (0)4 93 95 67 33
 /    \____ Mailto:werner@cstb.fr -- ASPAM=antispamwpk42
 \____/     http://evl.cstb.fr/english/team/WK/werner.htm

WARNING : Email is not a reliable medium. Never asume that any 
         email you send is actual read by a human being.